The 802.11 standard provides a method for supplying different levels of access to different nodes in a wireless local area network (WLAN). This is handled through authentication and association. Each node and access point (AP) in the WLAN is required to keep an authentication state and an association state with each other node and AP that it is in contact with. Authentication is how a node gains access to the network. It is a proof of identity and that the node is allowed access to the network. This is comparable to physically attaching an ethernet cable to the node for a wired network. Along with authentication, there is a deauthentication service. This is used to disallow any further service to be provided to a node.
Once a node has been authenticated it must become associated with an AP. This is how the network determines where to send data that is intended for that node. It routes it through the AP that the node is associated with. This is why a node may only be associated with a single AP. There is also a disassociation procedure where by the node can disconnect from the WLAN. This prevents the AP from continuing to attempt to transmit data to this node after it has left the WLAN.
The final association procedure is designed to allow a smooth transition when a node moves from within the transmission range of one AP to another. This is the reassociation service. This service combines an association service with a notification of which AP it was previously associated with. This allows the new AP to accept the association, and request that any data buffered at the previous AP for the node be forwarded.
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)
