papaja 生成的 Rmarkdown 中使用 ragged2e 进行文本对齐

2023-12-08

我一直在尝试使用“ragged2e”在 papaja 生成的文档中使用此处提出的方法进行文本对齐:

https://stackoverflow.com/a/50042106

然而,当我尝试编织这个时:

---
title             : "My title"
shorttitle        : "Title"

author: 
  - name          : "Raphaël Lorenz-de Laigue"
    affiliation   : "1"
    corresponding : yes    # Define only one corresponding author
    address       : "Postal address"
    email         : "[email protected]"

affiliation:
  - id            : "1"
    institution   : "Humboldt-Universität zu Berlin"

abstract: This is my abstract.
keywords          : "keywords"
wordcount         : "X"

floatsintext      : no
figurelist        : no
tablelist         : no
footnotelist      : no
linenumbers       : no
mask              : no
draft             : no
figsintext        : yes
header-includes:
   - \usepackage[document]{ragged2e}
documentclass     : "apa6"
classoption       : "man"
output:
  papaja::apa6_pdf:
    latex_engine: xelatex
    fig_caption: yes
---
```{r, include=FALSE}
options(tinytex.verbose = TRUE)
```
\justify

# Intro
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Commodo quis imperdiet massa tincidunt. Magna fermentum iaculis eu non diam phasellus vestibulum lorem. Ultricies integer quis auctor elit sed vulputate mi. Ligula ullamcorper malesuada proin libero nunc. Viverra justo nec ultrices dui sapien. Quisque egestas diam in arcu cursus euismod quis viverra. Suspendisse potenti nullam ac tortor vitae purus faucibus. Massa sapien faucibus et molestie ac. Volutpat commodo sed egestas egestas fringilla phasellus. Nibh cras pulvinar mattis nunc sed blandit libero volutpat. Ullamcorper morbi tincidunt ornare massa eget egestas purus viverra. Eu facilisis sed odio morbi quis. In aliquam sem fringilla ut morbi tincidunt augue. Dictumst quisque sagittis purus sit amet volutpat consequat mauris. Nec feugiat nisl pretium fusce. Sed euismod nisi porta lorem mollis aliquam ut porttitor. Ut enim blandit volutpat maecenas volutpat. Consectetur lorem donec massa sapien. Urna neque viverra justo nec.

我收到以下错误消息:

I was unable to find any missing LaTeX packages from the error log not_justified.log.
! Improper \prevdepth.
\newpage ...everypar {}\fi \par \ifdim \prevdepth 
                                                  >\z@ \vskip -\ifdim \prevd...
l.190 \end{document}

Error: LaTeX failed to compile not_justified.tex. See https://yihui.org/tinytex/r/#debugging for debugging tips. See not_justified.log for more info.
In addition: Warning message:
In readLines(con, encoding = "bytes") :
  incomplete final line found on 'justified.Rmd'
Execution halted

我尝试更新 R 和 LaTeX 软件包,重新安装 tinytex,如下所示:https://yihui.org/tinytex/r/#debugging

该代码包含“tinytex.verbose”选项,如您在上面看到的。

Best,

R.

Edit:

这是中间 .tex 文件的内容

% Options for packages loaded elsewhere
\PassOptionsToPackage{unicode}{hyperref}
\PassOptionsToPackage{hyphens}{url}
%
\documentclass[
  man,floatsintext]{apa6}
\usepackage{amsmath,amssymb}
\usepackage{lmodern}
\usepackage{iftex}
\ifPDFTeX
  \usepackage[T1]{fontenc}
  \usepackage[utf8]{inputenc}
  \usepackage{textcomp} % provide euro and other symbols
\else % if luatex or xetex
  \usepackage{unicode-math}
  \defaultfontfeatures{Scale=MatchLowercase}
  \defaultfontfeatures[\rmfamily]{Ligatures=TeX,Scale=1}
\fi
% Use upquote if available, for straight quotes in verbatim environments
\IfFileExists{upquote.sty}{\usepackage{upquote}}{}
\IfFileExists{microtype.sty}{% use microtype if available
  \usepackage[]{microtype}
  \UseMicrotypeSet[protrusion]{basicmath} % disable protrusion for tt fonts
}{}
\makeatletter
\@ifundefined{KOMAClassName}{% if non-KOMA class
  \IfFileExists{parskip.sty}{%
    \usepackage{parskip}
  }{% else
    \setlength{\parindent}{0pt}
    \setlength{\parskip}{6pt plus 2pt minus 1pt}}
}{% if KOMA class
  \KOMAoptions{parskip=half}}
\makeatother
\usepackage{xcolor}
\IfFileExists{xurl.sty}{\usepackage{xurl}}{} % add URL line breaks if available
\IfFileExists{bookmark.sty}{\usepackage{bookmark}}{\usepackage{hyperref}}
\hypersetup{
  pdftitle={My title},
  pdfauthor={Raphaël Lorenz-de Laigue1},
  pdflang={en-EN},
  pdfkeywords={keywords},
  hidelinks,
  pdfcreator={LaTeX via pandoc}}
\urlstyle{same} % disable monospaced font for URLs
\usepackage{graphicx}
\makeatletter
\def\maxwidth{\ifdim\Gin@nat@width>\linewidth\linewidth\else\Gin@nat@width\fi}
\def\maxheight{\ifdim\Gin@nat@height>\textheight\textheight\else\Gin@nat@height\fi}
\makeatother
% Scale images if necessary, so that they will not overflow the page
% margins by default, and it is still possible to overwrite the defaults
% using explicit options in \includegraphics[width, height, ...]{}
\setkeys{Gin}{width=\maxwidth,height=\maxheight,keepaspectratio}
% Set default figure placement to htbp
\makeatletter
\def\fps@figure{htbp}
\makeatother
\setlength{\emergencystretch}{3em} % prevent overfull lines
\providecommand{\tightlist}{%
  \setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
\setcounter{secnumdepth}{-\maxdimen} % remove section numbering
% Make \paragraph and \subparagraph free-standing
\ifx\paragraph\undefined\else
  \let\oldparagraph\paragraph
  \renewcommand{\paragraph}[1]{\oldparagraph{#1}\mbox{}}
\fi
\ifx\subparagraph\undefined\else
  \let\oldsubparagraph\subparagraph
  \renewcommand{\subparagraph}[1]{\oldsubparagraph{#1}\mbox{}}
\fi
\ifLuaTeX
\usepackage[bidi=basic]{babel}
\else
\usepackage[bidi=default]{babel}
\fi
\babelprovide[main,import]{english}
% get rid of language-specific shorthands (see #6817):
\let\LanguageShortHands\languageshorthands
\def\languageshorthands#1{}
% Manuscript styling
\usepackage{upgreek}
\captionsetup{font=singlespacing,justification=justified}

% Table formatting
\usepackage{longtable}
\usepackage{lscape}
% \usepackage[counterclockwise]{rotating}   % Landscape page setup for large tables
\usepackage{multirow}       % Table styling
\usepackage{tabularx}       % Control Column width
\usepackage[flushleft]{threeparttable}  % Allows for three part tables with a specified notes section
\usepackage{threeparttablex}            % Lets threeparttable work with longtable

% Create new environments so endfloat can handle them
% \newenvironment{ltable}
%   {\begin{landscape}\centering\begin{threeparttable}}
%   {\end{threeparttable}\end{landscape}}
\newenvironment{lltable}{\begin{landscape}\centering\begin{ThreePartTable}}{\end{ThreePartTable}\end{landscape}}

% Enables adjusting longtable caption width to table width
% Solution found at http://golatex.de/longtable-mit-caption-so-breit-wie-die-tabelle-t15767.html
\makeatletter
\newcommand\LastLTentrywidth{1em}
\newlength\longtablewidth
\setlength{\longtablewidth}{1in}
\newcommand{\getlongtablewidth}{\begingroup \ifcsname LT@\roman{LT@tables}\endcsname \global\longtablewidth=0pt \renewcommand{\LT@entry}[2]{\global\advance\longtablewidth by ##2\relax\gdef\LastLTentrywidth{##2}}\@nameuse{LT@\roman{LT@tables}} \fi \endgroup}

% \setlength{\parindent}{0.5in}
% \setlength{\parskip}{0pt plus 0pt minus 0pt}

% Overwrite redefinition of paragraph and subparagraph by the default LaTeX template
% See https://github.com/crsh/papaja/issues/292
\makeatletter
\renewcommand{\paragraph}{\@startsection{paragraph}{4}{\parindent}%
  {0\baselineskip \@plus 0.2ex \@minus 0.2ex}%
  {-1em}%
  {\normalfont\normalsize\bfseries\itshape\typesectitle}}

\renewcommand{\subparagraph}[1]{\@startsection{subparagraph}{5}{1em}%
  {0\baselineskip \@plus 0.2ex \@minus 0.2ex}%
  {-\z@\relax}%
  {\normalfont\normalsize\itshape\hspace{\parindent}{#1}\textit{\addperi}}{\relax}}
\makeatother

% \usepackage{etoolbox}
\makeatletter
\patchcmd{\HyOrg@maketitle}
  {\section{\normalfont\normalsize\abstractname}}
  {\section*{\normalfont\normalsize\abstractname}}
  {}{\typeout{Failed to patch abstract.}}
\patchcmd{\HyOrg@maketitle}
  {\section{\protect\normalfont{\@title}}}
  {\section*{\protect\normalfont{\@title}}}
  {}{\typeout{Failed to patch title.}}
\makeatother

\usepackage{xpatch}
\makeatletter
\xapptocmd\appendix
  {\xapptocmd\section
    {\addcontentsline{toc}{section}{\appendixname\ifoneappendix\else~\theappendix\fi\\: #1}}
    {}{\InnerPatchFailed}%
  }
{}{\PatchFailed}
\keywords{keywords\newline\indent Word count: X}
\DeclareDelayedFloatFlavor{ThreePartTable}{table}
\DeclareDelayedFloatFlavor{lltable}{table}
\DeclareDelayedFloatFlavor*{longtable}{table}
\makeatletter
\renewcommand{\efloat@iwrite}[1]{\immediate\expandafter\protected@write\csname efloat@post#1\endcsname{}}
\makeatother
\usepackage{csquotes}
\usepackage[document]{ragged2e}
\ifLuaTeX
  \usepackage{selnolig}  % disable illegal ligatures
\fi

\title{My title}
\author{Raphaël Lorenz-de Laigue\textsuperscript{1}}
\date{}


\shorttitle{Title}

\authornote{

Correspondence concerning this article should be addressed to Raphaël Lorenz-de Laigue, Postal address. E-mail: \href{mailto:[email protected]}{\nolinkurl{[email protected]}}

}

\affiliation{\vspace{0.5cm}\textsuperscript{1} Humboldt-Universität zu Berlin}

\abstract{%
This is my abstract.
}



\begin{document}
\maketitle

\justify

\hypertarget{intro}{%
\section{Intro}\label{intro}}

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Commodo quis imperdiet massa tincidunt. Magna fermentum iaculis eu non diam phasellus vestibulum lorem. Ultricies integer quis auctor elit sed vulputate mi. Ligula ullamcorper malesuada proin libero nunc. Viverra justo nec ultrices dui sapien. Quisque egestas diam in arcu cursus euismod quis viverra. Suspendisse potenti nullam ac tortor vitae purus faucibus. Massa sapien faucibus et molestie ac. Volutpat commodo sed egestas egestas fringilla phasellus. Nibh cras pulvinar mattis nunc sed blandit libero volutpat. Ullamcorper morbi tincidunt ornare massa eget egestas purus viverra. Eu facilisis sed odio morbi quis. In aliquam sem fringilla ut morbi tincidunt augue. Dictumst quisque sagittis purus sit amet volutpat consequat mauris. Nec feugiat nisl pretium fusce. Sed euismod nisi porta lorem mollis aliquam ut porttitor. Ut enim blandit volutpat maecenas volutpat. Consectetur lorem donec massa sapien. Urna neque viverra justo nec.


\end{document}

The justify不是宏观,而是环境。该环境旨在用作\begin{justify} ... \end{justify}.

就您而言,如果您仍想在其中使用 markdown,则可能不需要环境。所以你可以使用宏\justifying反而:

---
title             : "My title"
shorttitle        : "Title"

author: 
  - name          : "Raphaël Lorenz-de Laigue"
    affiliation   : "1"
    corresponding : yes    # Define only one corresponding author
    address       : "Postal address"
    email         : "[email protected]"

affiliation:
  - id            : "1"
    institution   : "Humboldt-Universität zu Berlin"

abstract: This is my abstract.
keywords          : "keywords"
wordcount         : "X"

floatsintext      : no
figurelist        : no
tablelist         : no
footnotelist      : no
linenumbers       : no
mask              : no
draft             : no
figsintext        : yes
header-includes:
   - \usepackage[document]{ragged2e}
documentclass     : "apa6"
classoption       : "man"
output:
  papaja::apa6_pdf:
    latex_engine: xelatex
    fig_caption: yes
---
```{r, include=FALSE}
options(tinytex.verbose = TRUE)
```
\justifying

# Intro
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Commodo quis imperdiet massa tincidunt. Magna fermentum iaculis eu non diam phasellus vestibulum lorem. Ultricies integer quis auctor elit sed vulputate mi. Ligula ullamcorper malesuada proin libero nunc. Viverra justo nec ultrices dui sapien. Quisque egestas diam in arcu cursus euismod quis viverra. Suspendisse potenti nullam ac tortor vitae purus faucibus. Massa sapien faucibus et molestie ac. Volutpat commodo sed egestas egestas fringilla phasellus. Nibh cras pulvinar mattis nunc sed blandit libero volutpat. Ullamcorper morbi tincidunt ornare massa eget egestas purus viverra. Eu facilisis sed odio morbi quis. In aliquam sem fringilla ut morbi tincidunt augue. Dictumst quisque sagittis purus sit amet volutpat consequat mauris. Nec feugiat nisl pretium fusce. Sed euismod nisi porta lorem mollis aliquam ut porttitor. Ut enim blandit volutpat maecenas volutpat. Consectetur lorem donec massa sapien. Urna neque viverra justo nec.
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系:hwhale#tublm.com(使用前将#替换为@)

papaja 生成的 Rmarkdown 中使用 ragged2e 进行文本对齐 的相关文章

  • 在 Markdown 中围绕文本浮动图形和标题以进行 html 输出

    我正在尝试使用 knitr 构建一个 html 报告 其中有文本描述 并混合了一些图形 如果可能的话 我希望能够将图形浮动到一边 并在未使用的空间中包含文本 我是其中的一部分 但我的问题是图形标题现在与图形本身分离 例如 请参见下图 这是可
  • Knit 无法编译 PDF:“工具中出现错误::file_path_as_absolute(output_file)”

    我已经在 markdown 中创建了一个报告并使用该函数render 将代码编译成 PDF 一个月前它工作得很好 但是当我现在运行代码时 它给了我一个错误 Latexmk 这是 Latexmk 约翰 柯林斯 2016 年 4 月 22 日
  • Latex:列表前后的垂直空间

    我无法摆脱列表前后的垂直空间 我有如下代码 begin list setlength itemsep 0pt setlength parskip 0pt setlength parsep 0pt item First item item S
  • 在 python 中将 Latex 代码转换为 mathml 或 svg 代码

    是否有任何 python 代码允许获取乳胶代码 用于方程 并将其解析为 mathml 或 svg 代码 一个以字符串 latex 代码 作为参数并输出字符串 svg 或 mathml 代码 的简单函数将是完美的 附言 我找到了这个http
  • 使用 flextable 中的 add_header_row 创建不同宽度的列

    我有数据如下 dat lt structure list rn c type A type B type C freq list c 0 0 0 5 7 16 28 c 2 1 0 5 0 8 c 0 0 3 5 12 53 73 cols
  • LaTeX:从第二行缩进

    我想从第二行缩进 我想用 LaTeX 写这样的东西 Lorem ipsum dolor sit amet consectetur adipiscing elit Proin eu tempor velit Fusce accumsan ul
  • 如何在plotly dash应用程序中编写数学符号?

    我想在绘图破折号应用程序中绘制数学符号 例如 我尝试过这个 import dash import dash html components as html app dash Dash name app layout html Div chi
  • tikz:为节点设置适当的x值

    这个问题源于这个问题here https stackoverflow com questions 2772972 latex curly braces outside math 我想生成一个跨越一些文本行的大括号 问题是我必须手动对齐 x
  • ^ 和 _ 宏之后出现的数字(是:LaTeX 限制?)

    我在 LaTeX 中遇到了一个恼人的问题 我有一个大约 1000 行的 tex 文件 我已经有了一些数字 但是当我尝试添加另一个数字时 它会吐出 Undefined control sequence
  • iPython 笔记本上的内联数学模式

    在 iPython 笔记本中 我如何编写数学公式 例如r 2在一行中 乳胶词汇中的内联数学模式 IE 打印公式的时候可以不换行吗 如果像在 LaTeX 中一样 它应该是 r 2 但它不起作用 感谢您的帮助 在 Markdown 单元格中 您
  • 如果文件类型 == tex

    如果文件是乳胶文件 我想在 vimrc 中运行命令 我想我的语法有问题 但它不起作用 有什么线索吗 if filetype tex set spell endif 您可以使用自动命令来实现您想要的 autocmd BufNewFile Bu
  • 将水平线添加到 html rmarkdown 文档隐藏文本部分

    我正在制作一个与 HTML 页面结合的 Rmarkdown 文档 我不想用标题或项目符号分隔某些文本部分 而是想在它们之间绘制水平线 根据http rmarkdown rstudio com authoring basics html ht
  • Python matplotlib:将轴标签/图例从粗体更改为常规粗细

    我正在尝试制作一些出版质量的图 但遇到了一个小问题 默认情况下 matplotlib 轴标签和图例条目的权重似乎比轴刻度线重 是否有办法强制轴标签 图例条目与刻度线的重量相同 import matplotlib pyplot as plt
  • 在`rmarkdown`中,如何在句子中添加图标?

    In rmarkdown 如何在句子中添加图标 例如如下 如何添加markdown icon单词 Markdown 和 is 之间 有一个很好的 R 包 可以轻松下载 RMarkdown 文档并将图标添加到其中 icons https gi
  • 通过 r markdown 中的循环创建代码片段

    如同如何使用R中的knitr创建一个包含代码块和文本的循环 https stackoverflow com questions 36373630 how to create a loop that includes both a code
  • 更改 pander 中的默认对齐方式 (pandoc.table)

    我目前正在切换到pander对于我的大部分时间knitr markdown格式化 因为它提供了如此出色的pandoc支持 我不太满意的一件事是默认的居中对齐 营销人员可能会喜欢它 但对于技术报告来说这是一个可怕的事情 使用的最佳选择Hmis
  • matplotlib 图形的乳胶渲染文本中的中心标题

    我想将 Matplotlib 图形的标题居中 其中在渲染 LaTeX 样式时包含换行符返回 在标题中间插入 Latex 的简单返回代码可以工作 但不会使其居中 从而导致换行符从第一行尴尬地移动 from matplotlib import
  • 如何确定 OS X 中的文件编码?

    我正在尝试将一些 UTF 8 字符输入到 LaTeX 文件中TextMate http en wikipedia org wiki TextMate 它说它的默认编码是UTF 8 但LaTeX似乎不理解它们 Running cat my f
  • 将空行添加到文字输出 RMarkdown

    再会 我正在尝试使用导出到 Word 文档的 rmarkdown 文件创建会议摘要提交 我正在尝试找到一种在输出的word文档中插入空行的方法 我发现可以通过在 Markdown 文件末尾添加两个空格来插入换行符 但是 当您只需要一个空行时
  • pandoc 文档转换失败,错误 67

    我使用的是 R 3 3 2 和 Rstudio 版本 1 0 44 这是我的 RMarkdown 文件的格式 title Sentiment Analysis output rmdformats material highlight kat

随机推荐

  • sql每月选择前5名

    我有一个格式为 mysql 的表 我们称其为product revenue Product id 年 月 收入 我需要获取以下列 年 月 revenue top 5 monthly 其中 Revenue top 5 monthly 是当月收
  • 将excel数据导入mysql数据库[重复]

    这个问题在这里已经有答案了 我有一个 excel 文件 其中有大约 5000 行要插入到我的 mysql 数据库表之一中 任何人都可以提供快速而肮脏的解决方案吗 谢谢 又快又脏 将计算列放入 Excel 中以生成 插入 语句 然后将所有句子
  • 按列中的字符串模式拆分 data.frame

    如同按值拆分 data frame我想按值拆分 df 就我而言 该值并不总是完全相同 我尝试了这个但没有成功 df lt data frame var1 c ab 1 2 3 ac 1 2 3 4 5 6 ad 1 2 var2 1 14
  • 从 sql ExecuteScalar() 检索值

    我有以下内容 String sql SELECT FROM Temp WHERE Temp collection Program collection SqlConnection conn new SqlConnection connStr
  • Angular.js 通过单击元素以外的任意位置关闭

    这是很常见的事情 就像你在 stackoverflow 上点击收件箱一样 我将调用该对话框或任何打开的内容thing 现在我知道有两种方法可以解决这个问题 您创建了一个不可见的覆盖层 其中只有您打开的元素 有更大的 zindex 然后你关闭
  • 如何在 QCombobox 中添加分隔符样式表

    我在带有分隔符的 qcombobox 中添加了两个项目 addItem New addItem Delete insertSeparator 2 为了突出显示具有不同样式的项目的选择 我使用 QLIstView 作为 QComboBox 视
  • 异步调用webservice并等待所有线程完成

    我需要多次调用 Web 服务来获取数据 然后将这些数据放入数据库中 因此我得到了以下代码 foreach string v in options IList
  • Mockito 如何模拟并断言抛出的异常?

    我在 junit 测试中使用mockito 如何让异常发生并断言它已经发生 通用伪代码 首先回答你的第二个问题 如果您使用的是 JUnit 4 您可以使用以下方式注释您的测试 Test expected MyException class
  • 如何在 Visual Studio 中使用 mongodb-cxx-driver 设置项目

    我已经使用 Visual Studio 在 Windows 上成功构建了新的 libmongo cxx driver 但我无法理解如何在 VS 2015 中设置项目来链接到它 我希望能得到一些帮助 Vcpkg 可帮助您在 Windows 上
  • 如何处理用户提供的公式?

    我有一个字典 其中包含一组可通过 Web 应用程序使用的键值 我想处理用户提供的公式 例如 值1 值3 值4 100 获得公式计算的匹配值与字典中的值的最简单方法是什么 考虑这个例子 usr bin python values value1
  • jquery ajax 与 async false 挂起 Firefox

    我有一个像这样调用 ajax 的代码 ajax type POST url sandbox graphloader mock3 async false data calInput1 dates 0 calInput2 dates 1 suc
  • 需要从浏览器调用客户端DLL

    我收到客户的要求 当任何用户刷卡时 他们的详细信息应该自动在客户端的网页中捕获 然而 我们在 IE 中也做了同样的事情 即在 C 中创建 ActiveX 控件 卡服务提供商在客户端安装他们的 DLL 并且从 ActiveX 控件中 我们可以
  • 预期:没有这样的变量[关闭]

    Closed 这个问题需要调试细节 目前不接受答案 我开始使用expect 我有一个简单的脚本 但我有一个问题 我想初始化一个第一个字符为 的变量 set mystring THIS IS MY STRING 所以我得到一个错误 因为exp
  • Heroku 上的“ModuleNotFoundError:没有名为“flask”的模块”

    我看到我收到 ModuleNotFoundError 没有名为 flask 的模块 这导致我的应用程序无法在 Heroku 上加载 我已经在虚拟环境和我的系统上安装了 Flask 但问题仍然存在 当我检查要求时 它说满意 这是我的日志 20
  • 在多个相同 ID 上使用 addEventListener

    我需要向我的转发 喜欢和不喜欢按钮添加一个事件侦听器 它们都具有相同的 ID 因此现在只有顶部推文的计数器增加 这是一个学校项目 所以我只能使用原始JS 这是小提琴的链接 https jsfiddle net 1sc7g5ko 这是我的 J
  • Drupal 6/jQuery Ajax 更新字段

    我位于同一站点的不同路径上 并且我需要允许用户更改他 她在不同位置写入的节点上的字段内容 我有 nodeid 和字段名称 以及 ids 等 np 我不认为这太难 但教程或解释会很棒 Thanks 编辑 谢谢 anschauung 的提问 所
  • 来自应用程序脚本的日历:每次需要授权时。仅适用于主日历

    在电子表格中 我有一个用于计算谷歌日历中的小时数的应用程序脚本 并将输出复制到电子表格中 几天前 一切都进展顺利 但今天 2013 年 7 月 1 日星期一 当我尝试运行该脚本时 每次都会收到消息 需要授权 http cl ly Q0bd
  • sails.js 获取文本/纯内容类型的 POST 有效负载

    我正在开发一个 sails js 基于express的node js框架 应用程序 进展顺利 但是 我无法解决这个细节 我需要从 Internet Explorer 8 和 9 跨域发送 POST 请求 为此 我被迫使用 xDomainRe
  • Hive 外部表中的最大列数

    我正在尝试在 Amazon 的 EMR 上设置 Hive 以从 DynamoDB 表中提取数据并将其转储到 S3 我已按照找到的说明进行操作here 并且我们的大多数桌子都取得了成功 但是 对于一个 DynamoDB 表 我收到错误 如下所
  • papaja 生成的 Rmarkdown 中使用 ragged2e 进行文本对齐

    我一直在尝试使用 ragged2e 在 papaja 生成的文档中使用此处提出的方法进行文本对齐 https stackoverflow com a 50042106 然而 当我尝试编织这个时 title My title shorttit