我想编写一个脚本来连接我的 FTP 服务器，但它对我不起作用。
from ftplib import FTP
ftp=FTP()
ftp.set_debuglevel(2)
ftp.connect('192.169.137.100')
ftp.login('test','test')
ftp.dir()
ftp.close()
当构建这个脚本时，我得到了这些信息
*get* '220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------\r\n'
*get* '220-You are user number 1 of 50 allowed.\r\n'
*get* '220-Local time is now 23:46. Server port: 21.\r\n'
*get* '220-This is a private system - No anonymous login\r\n'
*get* '220 You will be disconnected after 15 minutes of inactivity.\r\n'
*resp* '220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------\n220-You are user number 1 of 50 allowed.\n220-Local time is now 23:46. Server port: 21.\n220-This is a private system - No anonymous login\n220 You will be disconnected after 15 minutes of inactivity.'
*cmd* 'USER test'
*put* 'USER test\r\n'
*get* '331 User test OK. Password required\r\n'
*resp* '331 User test OK. Password required'
*cmd* 'PASS ****'
*put* 'PASS ****\r\n'
*getTraceback (most recent call last):
File "D:\photoWebSite\py_test.py", line 9, in <module>
* '530 Login authentication failed\r\n'
*resp* '530 Login authentication failed'
ftp.login('test','test')
File "D:\LinuxSL\python27\lib\ftplib.py", line 393, in login
if resp[0] == '3': resp = self.sendcmd('PASS ' + passwd)
File "D:\LinuxSL\python27\lib\ftplib.py", line 249, in sendcmd
return self.getresp()
File "D:\LinuxSL\python27\lib\ftplib.py", line 224, in getresp
raise error_perm, resp
ftplib.error_perm: 530 Login authentication failed
我希望有一些帮助。
您可以尝试使用FTP_TLS如下：
from ftplib import FTP_TLS
ftp=FTP_TLS()
ftp.set_debuglevel(2)
ftp.connect('192.169.137.100', 22)
ftp.sendcmd('USER test')
ftp.sendcmd('PASS test')
ftp.dir()
ftp.close()
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)
