编辑:请记住阅读此问题的评论,因为其他用户提供了更最新、更准确的解决方案。
好吧,我所做的是,当它说
The path "" is not a valid path to the 3.8.0-19-generic kernel headers.
Would you like to cange it?
我输入“否”,然后它停止了安装。然后我写了
usr/bin/vmware-config-tools.pl
再次命令它会自动执行,我认为跳过了这些步骤,它说
The configuration of vmware tools 9.2.3 build-1031360 for linux for this running kernel completed
successfully. you must restart your X session before any mouse or graphics cahnges can take effect.
you can now run vmware tools by invoking "/usr/bin/vmware-toolbox-cmd" from the command line.
to enable X features (e.g., guest resolution fit, drag and drop, and file and text copy/pase),
you will need to do one (or more) of the following:
1. manually start /usr/bin/vmware-user
2. log out and lokg back into your desktop sessionl and,
3. restart your X session
to use the vmxnet driver, restart networking using the following commands:
/etc/init.d/networking stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/networking start
如果我的 VMware 工具无法正常运行,我会在这篇文章中回复。
另外,还要感谢那个在没有回复或告诉我原因的情况下就投了否决票的人。
好吧,我开始使用VMware,效果很好!我需要在主机操作系统和虚拟机之间设置共享驱动器,并且需要运行
sudo vmware-config-tools.pl
再次在提示中,它说路径“/usr/bin/gcc”似乎有效,“lib/modules/3.8.0-30-generic/build/include”的路径似乎有效(如果您阅读我的发帖,如果你们没有这样做
sudo apt-get install linux-headers-$(uname -r)
sudo apt-get install linux-headers-generic
它可能会说“lib/modules/3.8.0-19-generic/build/include”而不是“lib/modules/3.8.0-30-generic/build/include”)。如果您有“-19”而不是“-30”,并且它不起作用,请尝试运行上面的两个命令并查看它是否起作用。