h3c交换机重置命令_h3c交换机如何初始化
reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]: y // 提示是否擦除配置文件
Configuration in the device is being cleared.
Please wait ...
...
Configuration in the device is cleared.
reboot
This command will reboot the system. Since the current configuration may have been changed, all changes may be lost if you continue. Continue? [Y/N] Y // 提示是否重启设备,按Y将重新启动
【提示】擦除配置文件后,必须要重启设备后才能恢复到出厂设置。
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系:hwhale#tublm.com(使用前将#替换为@)