当 pjmedia_conf_connect_port 在 pjsip 中执行 SIGABRT 时，录音呼叫崩溃

早些时候，当我使用 pjsip 2.7.1 时，它工作正常。通话录音很完美。但现在我已经安装了pjsip 2.9。它在 pjmedia_conf_connect_port 上崩溃。 SIGABRT 因为 pjsua_var.mconf。我不知道它什么时候在pjsip中分配的。请解释并帮助解决这个问题。

提前致谢

我尝试在录音中使用它之前创建一个媒体会议。但最终却没有任何声音。

+(void)startRecordingForCalleeId:(NSString *)calleeId andCallId:(int)callid
{


    NSLog(@"start recording...........");
    Recording *sipRecording = [[SPCoreDataManager sharedManager]createBlankSipRecordingForCalleeId:calleeId];
    NSString *filePath = [[SPFileManager sharedManager] pathForFile:sipRecording.fileName];


    SPAppDelegate *appDelegate = (SPAppDelegate *)[[UIApplication sharedApplication] delegate];
    appDelegate.objectID = sipRecording.objectID;
    pj_str_t fileName = pj_str([filePath UTF8String]);
    status = pjsua_recorder_create(&fileName, 0, NULL, -1, 0, &recorder_id);
    NSLog(@"status issss-->%d",status);



    [[NSUserDefaults standardUserDefaults] setInteger:recorder_id forKey:@"recording_id"];
    [[NSUserDefaults standardUserDefaults] synchronize];

    NSLog(@"recordder id id--->%d",recorder_id);
    NSLog(@"recording is for start recording is--->%d",app_config.rec_id);

    //status = pjsua_recorder_create(&fileName, 0, NULL, -1, 0, &app_config.rec_id);

    if (status != PJ_SUCCESS)
    {
        pjsua_perror(__FILE__, "error dll_startAudioCapture from pjsua_recorder_create", status);
    }
    else
    {
        //app_config.rec_port = pjsua_recorder_get_conf_port(app_config.rec_id);
        app_config.rec_port = pjsua_recorder_get_conf_port(recorder_id);

        PJ_LOG(5, (__FILE__, "dll_startAudioCapture recId=%d confPort=%d", app_config.rec_id, app_config.rec_port));

        pjmedia_conf_connect_port(pjsua_var.mconf, callid,app_config.rec_port, 0);//working for the 1st call
        pjsua_call_get_info(callid, &call_info); //callid


        pjsua_state state = pjsua_get_state();
        if (state == PJSUA_STATE_NULL){
            return;
        }
        pjmedia_conf_connect_port(pjsua_var.mconf, call_info.conf_slot,app_config.rec_port, 0); //working for the 1st call
        pjsua_conf_connect(call_info.conf_slot, app_config.rec_port);
        pjsua_conf_connect(0, app_config.rec_port);


        if (status != PJ_SUCCESS)
        {
            pjsua_perror(__FILE__, "error dll_startAudioCapture edia_conf_connect_port snd->recport", status);
        }

        if (status != PJ_SUCCESS)
        {
            //pjsua_perror(THIS_FILE, @"error dll_startAudioCapture pjmedia_conf_connect_port caller->recport", status);
        }
        //boost callTaker's and caller audio levels as configured
        if ((status = pjmedia_conf_adjust_rx_level(pjsua_var.mconf, pjsua_var.recorder[app_config.rec_id].slot,0)) == PJ_SUCCESS)
        {
            //                PJ_LOG(5, (THIS_FILE, "dll_startAudioCapture pjmedia_conf_adjust_rx_level by %d", g_audCapClientBoost));
        }
        else
        {
            pjsua_perror(__FILE__, "Error dll_startAudioCapture pjmedia_conf_adjust_rx_level", status);
        }
        if ((status = pjmedia_conf_adjust_tx_level(pjsua_var.mconf,pjsua_var.recorder[app_config.rec_id].slot,0)) == PJ_SUCCESS)
        {
            //                PJ_LOG(5, (THIS_FILE, "dll_startAudioCapture pjmedia_conf_adjust_tx_level by %d", g_audCapServerBoost));
        }
        else
        {
            pjsua_perror(__FILE__, "Error dll_startAudioCapture pjmedia_conf_adjust_tx_level", status);
        }
        hasRecordingStarted = 1;
    }

}

请帮忙

if (ci.media_status == PJSUA_CALL_MEDIA_ACTIVE) {
                userCall.hasConnected = true
                pjsua_conf_connect(ci.conf_slot, 0)
                pjsua_conf_connect(0, ci.conf_slot)
                if recorderPortId != PJSUA_INVALID_ID.rawValue {
                    pjsua_conf_connect(ci.conf_slot, recorderPortId)
                }
            }

我们应该在连接声音端口之后连接conf端口。即使您在创建记录器后连接端口，也将其连接到此处。您将录制清晰的声音。