我花了几周的时间尝试为我的 Panda 板交叉编译 Qt，但没办法，我无法通过 ./configure。如果有人能给我帮助，我将不胜感激。
我的主机系统是Ubuntu-13.04×86_64位（在Virtualbox中运行）
我的目标系统是 Pandaboard ES Ubuntu-12.04。
主机盒中的所有步骤：
sudo apt-get install arm-linux-gnueabihf
sudo mkdir /opt/qt-485-armhf
cd /usr/src
sudo wget http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz
sudo tar xf qt-everywhere-opensource-src-4.8.5.tar.gz
cd /usr/src/qt-everywhere-opensource-src-4.8.5
sudo cp -r mkspecs/qws/linux-arm-gnueabi-g++ mkspecs/qws/linux-arm-gnueabihf-g++
sudo vim mkspecs/qws/linux-arm-gnueabihf-g++/qmake.conf
-------------------------------
include(../../common/gcc-base-unix.conf)
include(../../common/g++-unix.conf)
include(../../common/linux.conf)
include(../../common/qws.conf)
#Compiler Flags to take advantage of the ARM architecture
#N.B.:I also tried to uncomment the two following instructions with no success
QMAKE_CFLAGS = -march=armv7-a -mtune=cortex-a9 -mfpu=neon -mfloat-abi=hard
QMAKE_CXXFLAGS = -march=armv7-a -mtune=cortex-a9 -mfpu=neon -mfloat-abi=hard
# modifications to g++.conf
QMAKE_CC = arm-linux-gnueabihf-gcc
QMAKE_CXX = arm-linux-gnueabihf-g++
QMAKE_LINK = arm-linux-gnueabihf-g++
QMAKE_LINK_SHLIB = arm-linux-gnueabihf-g++
# modifications to linux.conf
QMAKE_AR = arm-linux-gnueabihf-ar cqs
QMAKE_OBJCOPY = arm-linux-gnueabihf-objcopy
QMAKE_STRIP = arm-linux-gnueabihf-strip
load(qt_config)
---------------------------------
sudo sed -i -e "/#if/d" -e "/#error/d" -e "/#endif/d" config.tests/unix/libmng/libmng.cpp (This command fixes detection of libmng 2.0.)
export QTDIR=/opt/qt4-485-armhf
And finally:
sudo ./configure -prefix /opt/qt4-485-armhf -sysconfdir /etc/xdg -embedded arm -little-endian -host-big-endian -no-qt3support -nomake examples -nomake demos -opensource -confirm-license -release -openssl-linked -no-phonon -no-phonon-backend -no-nis -platform qws/linux-x86_64-g++ -xplatform qws/linux-arm-gnueabihf-g++ -optimized-qmake
With this result:
Creating qmake. Please wait...
g++ -c -o option.o -pipe -m64 -DQMAKE_OPENSOURCE_EDITION -O2 -g -I. -Igenerators -Igenerators/unix -Igenerators/win32 -Igenerators/mac -Igenerators/symbian -Igenerators/integrity -I/usr/src/qt-everywhere-opensource-src-4.8.5/include -I/usr/src/qt-everywhere-opensource-src-4.8.5/include/QtCore -I/usr/src/qt-everywhere-opensource-src-4.8.5/src/corelib/global -I/usr/src/qt-everywhere-opensource-src-4.8.5/src/corelib/xml -I/usr/src/qt-everywhere-opensource-src-4.8.5/tools/shared -DQT_NO_PCRE -DQT_BUILD_QMAKE -DQT_BOOTSTRAPPED -DQLIBRARYINFO_EPOCROOT -DQT_NO_TEXTCODEC -DQT_NO_UNICODETABLES -DQT_NO_COMPONENT -DQT_NO_STL -DQT_NO_COMPRESS -I/usr/src/qt-everywhere-opensource-src-4.8.5/mkspecs/qws/linux-x86_64-g++ -DHAVE_QCONFIG_CPP -DQT_NO_THREAD -DQT_NO_QOBJECT -DQT_NO_GEOM_VARIANT -DQT_NO_DEPRECATED option.cpp
g++ -o "/usr/src/qt-everywhere-opensource-src-4.8.5/bin/qmake" project.o property.o main.o makefile.o unixmake2.o unixmake.o mingw_make.o option.o winmakefile.o projectgenerator.o meta.o makefiledeps.o metamakefile.o xmloutput.o pbuilder_pbx.o borland_bmake.o msvc_vcproj.o msvc_vcxproj.o msvc_nmake.o msvc_objectmodel.o msbuild_objectmodel.o symmake.o initprojectdeploy_symbian.o symmake_abld.o symmake_sbsv2.o symbiancommon.o registry.o epocroot.o gbuild.o qtextcodec.o qutfcodec.o qstring.o qtextstream.o qiodevice.o qmalloc.o qglobal.o qbytearray.o qbytearraymatcher.o qdatastream.o qbuffer.o qlist.o qfile.o qfilesystementry.o qfilesystemengine_unix.o qfilesystemengine.o qfilesystemiterator_unix.o qfsfileengine_unix.o qfsfileengine.o qfsfileengine_iterator.o qregexp.o qvector.o qbitarray.o qdir.o qdiriterator.o quuid.o qhash.o qfileinfo.o qdatetime.o qstringlist.o qabstractfileengine.o qtemporaryfile.o qmap.o qmetatype.o qsettings.o qsystemerror.o qlibraryinfo.o qvariant.o qvsnprintf.o qlocale.o qlocale_tools.o qlocale_unix.o qlinkedlist.o qnumeric.o qcryptographichash.o qxmlstream.o qxmlutils.o
You have not explicitly asked to use pkg-config and are cross-compiling.
pkg-config will not be used to automatically query cflag/lib parameters for
dependencies
The system floating point format could not be detected.
This may cause data to be generated in a wrong format
Turn on verbose messaging (-v) to see the final report.
OpenSSL support cannot be enabled due to functionality tests!
Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.
提前致谢。
交叉编译程序PC你必须有发展安装在相同软件包上的文件PC as the ARM目标. Qt 4.8依赖于取决于OpenSSL，因此您必须获得正确的开发文件ARM如果你想编译就释放Qt.
- 安装 Ubuntu 12.04 PC 虚拟盒。与主板相同版本.
- 获取编译器。
apt-get install arm-linux-gnueabihf（你知道的）。
- Get 所需的开发包 http://qt-project.org/doc/qt-4.8/requirements.html.
apt-get install libssl-dev or
apt-get build-dep -aarmhf qt4（仅适用于 X11）。
- 编辑你的Qt配置以满足您的需求并构建它。
您当前缺少的步骤是step 3;但要执行它你需要step 1或其他方式获得OpenSSLUbuntu 12.04 的开发文件。可能还有其他方法可以使用apt.sources。我认为上述步骤对您来说是最简单的。
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)
