本文介绍如何利用Kalibr标定工具进行双目相机与IMU的联合标定。主要过程包括以下四步：
- 生成标定板
- 标定双目相机
- 标定IMU
- 联合标定
1. 生成标定板
使用AprilTag
rosrun kalibr kalibr_create_target_pdf --type apriltag --nx 6 --ny 6 --tsize 0.002 --tspace 0.3
遇到问题"ImportError: No module named pyx" 玄学解法：
sudo apt-get install python-pyx
2. 标定双目相机
降低帧率
rosrun topic_tools throttle messages /l_cam/image_raw 4 /left
rosrun topic_tools throttle messages /r_cam/image_raw 4 /right
advertised as /left //出现时说明将帧成功
录制bag包
rosbag record /left /right >mycamera.bag
遇到的错误
ImportError: cannot import name NavigationToolbar2Wx
/home/cjn/kalibr/src/kalibr/Schweizer-Messer/sm_python/python/sm/PlotCollection.py
解决方法：将 PlotCollection.py 中的NavigationToolbar2Wx 改为 NavigationToolbar2WxAgg
ImportError: No module named igraph
sudo apt-get install python2.7-igraph
kalibr标定时出现：ImportError: No module named Image.
解决方法： 在kalibr_workspace/aslam_offline_calibration/kalibr/python/kalibr_camera_calibration/MulticamGraph.py中
将import Image改为from PIL import Image
rosrun kalibr kalibr_calibrate_cameras --bag '/home/guoben/stereocam.bag' --topics /left /right --models pinhole-radtan pinhole-radtan --target '/home/guoben/Project/Kalibr_ws/april_6x6_80x80cm.yaml' --show-extraction --approx-sync 0.1
注意事项：
- 标定的时候图中不能存在两个标定板
- 起始画面和终止画面要稳定
3. 标定IMU
参考：IMU噪声标定——加速度计和陀螺仪的白噪声和零偏不稳定性
//录制bag文件
- collect the data while the IMU is Stationary, with a two hours duration;
rosbag record /imu0
有Code_utils和imu_utils两个包 先编译code_utils再编译imu_tils
得到的imu.yaml
type: IMU
name: ICM20602
Gyr:
unit: " rad/s"
avg-axis:
gyr_n: 1.4127871720120859e+02
gyr_w: 4.8477797168896648e-03
x-axis:
gyr_n: 3.9615886574940606e+02
gyr_w: 4.8477797168896648e-03
y-axis:
gyr_n: 1.5284722859858114e+01
gyr_w: 4.8477797168896648e-03
z-axis:
gyr_n: 1.2392562994361640e+01
gyr_w: 4.8477797168896648e-03
Acc:
unit: " m/s^2"
avg-axis:
acc_n: 3.8264508828802807e-01
acc_w: 1.0613073078261251e-02
x-axis:
acc_n: 3.6962189636668691e-01
acc_w: 1.0916554449621266e-02
y-axis:
acc_n: 4.6707198750779616e-01
acc_w: 1.0721472803944067e-02
z-axis:
acc_n: 3.1124138098960102e-01
acc_w: 1.0201191981218414e-02
修改为如下样式：
rostopic: /imu0
update_rate: 100.0 #Hz
accelerometer_noise_density: 3.8264508828802807e-01 #continous
accelerometer_random_walk: 1.0613073078261251e-02
gyroscope_noise_density: 1.4127871720120859e+02 #continous
gyroscope_random_walk: 4.8477797168896648e-03
4. 录制数据包
沿着3个轴旋转平移三次
5. 联合标定
准备好四个文件
- 标定半文件
- 相机参数文件
- imu参数文件
- 数据bag文件
rosrun kalibr kalibr_calibrate_imu_camera --target april_6x6_80x80cm.yaml --cam stereocam.yaml --imu ICM20602.yaml --bag camera_imu.bag --timeoffset-padding 0.1
6. 标定结果
得到结果为camchain.yaml
cam0:
T_cam_imu: # 从IMU到相机坐标的转换
- [0.08233179976406399, -0.9949127683235393, -0.05805220214946505, -0.008744023342066004]
- [-0.9959106050536686, -0.08430878258416843, 0.032466843406961834, 0.07000917129335886]
- [-0.03719598754229868, 0.055141750117018384, -0.9977854708827878, -0.11902680705823296]
- [0.0, 0.0, 0.0, 1.0]
cam_overlaps: [1]
camera_model: pinhole
distortion_coeffs: [-0.4274960254764774, 0.1522753401860188, 0.022086313718892994,
-0.0007250205609533983] #失真模型的参数向量
distortion_model: radtan
intrinsics: [576.2948258096362, 570.5120047531799, 290.9276492936449, 165.99488000803987] #相机内参 之前标好的
resolution: [640, 480] #分辨率
rostopic: /l_cam/image_raw #话题
timeshift_cam_imu: -0.04319840825131607 #漂移
cam1:
T_cam_imu: # 从IMU到相机坐标的转换
- [0.0894795247331801, -0.9911722483784674, 0.0978314300104943, -0.06676213145949367]
- [-0.995095690056223, -0.08480851440432002, 0.05091250844401363, 0.06960856622513922]
- [-0.04216612722380045, -0.10190726141402426, -0.9938998580269747, -0.12389393733183268]
- [0.0, 0.0, 0.0, 1.0]
T_cn_cnm1:
- [0.9878176058814627, -0.002372804306504643, -0.1555980311904324, -0.07647885002996721]
- [-0.000506528488511444, 0.9998294218114983, -0.01846268422998622, -0.0025906464811484946]
- [0.155615297896788, 0.018316579369764666, 0.9876479038507021, -0.0062589855841411746]
- [0.0, 0.0, 0.0, 1.0]
cam_overlaps: [0]
camera_model: pinhole
distortion_coeffs: [-0.4358292770104687, 0.13856343257725542, 0.01867787729653694,
-0.011189753016360725]
distortion_model: radtan
intrinsics: [572.0873971077864, 571.5888157262697, 349.04660762135626, 174.35778659111406]
resolution: [640, 480]
rostopic: /r_cam/image_raw
timeshift_cam_imu: -0.002440062477866302
7. 使用Kalibr进行单目相机与IMU的联合标定
出现问题：
Spline Coefficient Buffer Exceeded. Set larger buffer margins”
在标定命令最后添加 --timeoffset-padding 0.1
timeoffset-padding这个参数可以适当的设置的大一些
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)
