1）src/test目录下创建jmeter文件
2）src/test/jmeter目录下创建xx项目名文件
3）xxx.jmx 脚本文件及依赖文件 放在src/test/jmeter/xx项目目录下
4）src/test/jmeter目录下放以下配置
jmeter.properties（必须）
user.properties（必须）
saveservice.properties
system.properties
upgrade.properties
来源：\apache-jmeter-5.0\bin
5）resources文件以下：
jmeter.results.shanhe.me.xsl（同时放到jmeter的extras目录下）
jmeter-results-detail-report.xsl
jmeter-results-detail-report_21.xsl
jmeter-results-report.xsl
jmeter-results-report_21.xsl
jmeter.save.saveservice.data_type=true
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
# response_data is not currently supported for CSV output
jmeter.save.saveservice.response_data=true
# Save ResponseData for failed samples
jmeter.save.saveservice.response_data.on_error=false
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.successful=true
jmeter.save.saveservice.thread_name=true
jmeter.save.saveservice.time=true
jmeter.save.saveservice.subresults=true
jmeter.save.saveservice.assertions=true
jmeter.save.saveservice.latency=true
# Only available with HttpClient4
jmeter.save.saveservice.connect_time=true
jmeter.save.saveservice.samplerData=true
jmeter.save.saveservice.responseHeaders=true
jmeter.save.saveservice.requestHeaders=true
jmeter.save.saveservice.encoding=false
jmeter.save.saveservice.bytes=true
# Only available with HttpClient4
jmeter.save.saveservice.sent_bytes=true
jmeter.save.saveservice.url=true
jmeter.save.saveservice.filename=true
jmeter.save.saveservice.hostname=true
jmeter.save.saveservice.thread_counts=true
jmeter.save.saveservice.sample_count=true
jmeter.save.saveservice.idle_time=true
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.danny</groupId>
<artifactId>jmeter-test</artifactId>
<version>1.0-SNAPSHOT</version>
<description>Check that report generation works</description>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
<!-- env.引用jenkins变量使用，生成jmeter脚本报告 -->
<!-- ${env.WORKSPACE}/jmeter/${env.BUILD_ID} 是预留再jenkins驱动的时候使用
${env.WORKSPACE}：jenkins的工作空间
${env.BUILD_ID}：每次调度的构建id路径-->
<!-- ${env.WORKSPACE}/Report/${env.BUILD_ID}/jtl
${env.WORKSPACE}/Report/${env.BUILD_ID}/details
${env.WORKSPACE}/Report/${env.BUILD_ID}/summary -->
<jmeter.result.jtl.dir>${env.WORKSPACE}/jmeter/${env.BUILD_ID}/results</jmeter.result.jtl.dir>
<jmeter.result.details.dir>${env.WORKSPACE}/jmeter/${env.BUILD_ID}/details</jmeter.result.details.dir>
<jmeter.result.summary.dir>${env.WORKSPACE}/jmeter/${env.BUILD_ID}/summary</jmeter.result.summary.dir>
<ReportName>接口自动化测试</ReportName>
</properties>
<!--groupId、artifactId和version：依赖的基本坐标，对于不论什么一个依赖来说，基本坐标是最重要的，Maven依据坐标才干找到须要的依赖。-->
<dependencies>
<!--数据库-->
<dependency>
<groupId>org.postgresql</groupId>
<artifactId>postgresql</artifactId>
<version>42.2.2</version>
</dependency>
<!--Apache POI提供API给Java程式对Microsoft Office（Excel、WORD、PowerPoint、Visio等）格式档案读和写的功能-->
<dependency>
<groupId>org.apache.poi</groupId>
<artifactId>poi</artifactId>
<version>3.17</version>
</dependency>
<dependency>
<groupId>org.apache.poi</groupId>
<artifactId>poi-ooxml</artifactId>
<version>3.17</version>
</dependency>
<!--json数据包-->
<dependency>
<groupId>net.sf.json-lib</groupId>
<artifactId>json-lib</artifactId>
<version>2.4</version>
<classifier>jdk15</classifier>
</dependency>
<!--mysql连接器-java-->
<!--https://mvnrepository.com/artifact/mysql/mysql-connector-java-->
<dependency>
<groupId>mysql</groupId>
<artifactId>mysql-connector-java</artifactId>
<version>5.1.47</version>
</dependency>
<!--testng依赖-->
<!--https://mvnrepository.com/artifact/org.testng/testng-->
<dependency>
<groupId>org.testng</groupId>
<artifactId>testng</artifactId>
<version>6.9.10</version>
</dependency>
<!--json转换处理器-->
<!--https://www.runoob.com/w3cnote/fastjson-intro.html-->
<dependency>
<groupId>com.alibaba</groupId>
<artifactId>fastjson</artifactId>
<version>1.2.75</version>
</dependency>
<!--此处 添加自己引入的jar包 -->
</dependencies>
<!--插件存储-->
<pluginRepositories>
<pluginRepository>
<id>Codehaus repository</id>
<url>http://repository.codehaus.org/</url>
<releases>
<enabled>true</enabled>
<updatePolicy>always</updatePolicy>
</releases>
<snapshots>
<enabled>true</enabled>
<updatePolicy>always</updatePolicy>
</snapshots>
</pluginRepository>
</pluginRepositories>
<build>
<plugins>
<!--<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<configuration>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
</configuration>
<executions>
<execution>
<id>make-assembly</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>-->
<plugin>
<!-- 核心插件，用来执行jmx脚本，注意版本号，2.1.0可以使用用jmeter3.1生成的脚本。最新的2.2.0使用jmeter3.2生成的脚本 -->
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>3.4.0</version>
<!--配置-->
<configuration>
<!--报告文件尾部输出时间 -->
<!-- 默认报告优化，修改jmeter.properties配置 -->
<propertiesJMeter>
<log_level.jmeter>DEBUG</log_level.jmeter>
</propertiesJMeter>
<resultsFileFormat>xml</resultsFileFormat>
<ignoreResultFailures>true</ignoreResultFailures>
<testResultsTimestamp>false</testResultsTimestamp>
<!-- 如果不想查看jmeter生成的log,设置为true -->
<suppressJMeterOutput>true</suppressJMeterOutput>
<!-- 增加扩展插件 -->
<jmeterExtensions>
<!--此处自己引入的jar包 -->
<!--<artifact>com.gongkong:auto-jmeter-new:1.0.0</artifact>-->
</jmeterExtensions>
<!-- 设置jmeter生成结果文件格式 -->
<resultsFileFormat>xml</resultsFileFormat>
<!-- 设置忽略失败是否停止运行 -->
<ignoreResultFailures>true</ignoreResultFailures>
<!--设置结果是否有时间戳,与appendResultsTimestamp 或resultsFileNameDateFormat 搭配使用-->
<testResultsTimestamp>false</testResultsTimestamp>
<testFilesIncluded>
<!-- 使用<jMeterTestFiles>选择执行用例 -->
<!-- <jMeterTestFile>order/*.jmx</jMeterTestFile>
<jMeterTestFile>product/*.jmx</jMeterTestFile>
<jMeterTestFile>supplyChain/*.jmx</jMeterTestFile>-->
<jMeterTestFile>price/*.jmx</jMeterTestFile>
<!-- 标签排除用例 -->
<!--<excludeJMeterTestFile>order/*.jmx</excludeJMeterTestFile>-->
</testFilesIncluded>
<resultsDirectory>${jmeter.result.jtl.dir}</resultsDirectory>
<!-- 使用<testFilesDirectory>指定测试用例的路径 -->
<!-- <testFilesDirectory>/scratch/testfiles/</testFilesDirectory> -->
<!-- 添加脚本需要的依赖 -->
<testPlanLibraries>
<artifact>mysql:mysql-connector-java:5.1.47</artifact>
</testPlanLibraries>
</configuration>
<!--执行-->
<executions>
<!-- Generate JMeter configuration -->
<execution>
<id>configuration</id>
<goals>
<goal>configure</goal>
</goals>
</execution>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<!-- Fail build on errors in test -->
<execution>
<id>jmeter-check-results</id>
<goals>
<goal>results</goal>
</goals>
</execution>
</executions>
<!-- <executions>
<execution>
<id>jmeter-tests</id>
<phase>verify</phase>
<!–脚本所在的文件夹 –>
<goals>
<goal>jmeter</goal>
</goals>
<configuration>
<appendResultsTimestamp>true</appendResultsTimestamp>
<skipTests>${skipTests}</skipTests>
</configuration>
</execution>
</executions>-->
</plugin>
<!-- 指定项目源码/编译的JDK版本 -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.7.0</version>
<configuration>
<source>1.8</source><!--源代码使用的JDK版本-->
<target>1.8</target><!--需要生成的目标class文件的编译版本-->
<encoding>UTF-8</encoding>
<compilerArguments>
<extdirs>${project.build.directory}/jmeter/lib</extdirs>
</compilerArguments>
</configuration>
</plugin>
<!-- 解决报告展开收缩的图标问题 -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-resources-plugin</artifactId><!--maven-resources-plugin则用来处理资源文件，可读取resources文件夹外的其他路径下的资源文件-->
<version>3.0.2</version>
<executions>
<execution>
<id>copy-resources</id>
<phase>compile</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${jmeter.result.summary.dir}</outputDirectory>
<resources>
<resource>
<directory>${basedir}/src/test/resources/png</directory>
<filtering>true</filtering>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<!--根据xsl模版把jtl文件转换成html，官网地址： http://www.mojohaus.org/xml-maven-plugin/examples/transform-saxon.html -->
<groupId>org.codehaus.mojo</groupId>
<artifactId>xml-maven-plugin</artifactId>
<version>1.0-beta-3</version>
<executions>
<execution>
<phase>verify</phase>
<goals>
<goal>transform</goal>
</goals>
</execution>
</executions>
<configuration>
<transformationSets>
<!-- 可以根据不同的模版，同时生成多个报告 -->
<transformationSet>
<dir>${jmeter.result.jtl.dir}</dir>
<stylesheet>src\test\resources\jmeter-results-detail-report_30.xsl</stylesheet>
<outputDir>${jmeter.result.summary.dir}</outputDir>
<fileMappers>
<fileMapper
implementation="org.codehaus.plexus.components.io.filemappers.FileExtensionMapper">
<targetExtension>html</targetExtension>
</fileMapper>
</fileMappers>
</transformationSet>
<transformationSet>
<dir>${jmeter.result.jtl.dir}</dir>
<stylesheet>src\test\resources\jmeter.results.shanhe.me.xsl</stylesheet>
<outputDir>${jmeter.result.details.dir}</outputDir>
<!-- 把jtl格式转传承html -->
<fileMappers>
<fileMapper
implementation="org.codehaus.plexus.components.io.filemappers.FileExtensionMapper">
<targetExtension>html</targetExtension>
</fileMapper>
</fileMappers>
</transformationSet>
</transformationSets>
</configuration>
<!-- using XSLT 2.0 解决时间为NAN -->
<dependencies>
<dependency>
<groupId>net.sf.saxon</groupId>
<artifactId>saxon</artifactId>
<version>8.7</version>
</dependency>
</dependencies>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId> <!--处理与依赖相关的插件-->
<executions>
<execution>
<!--dependency:copy：将一系列在此插件内列出的artifacts ，将他们copy到一个特殊的地方，重命名或者去除其版本信息。这个可以解决远程仓库存在但是本地仓库不存在的依赖问题，copy操作可以用来将某个（些）maven artifact(s)拷贝到某个目录-->
<id>copy-dependencies</id>
<phase>prepare-package</phase>
<goals>
<goal>copy-dependencies</goal>
</goals>
<configuration>
<outputDirectory>${project.build.directory}/jmeter/lib</outputDirectory>
<overWriteReleases>false</overWriteReleases>
<overWriteSnapshots>false</overWriteSnapshots>
<overWriteIfNewer>true</overWriteIfNewer>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-jar-plugin</artifactId><!--生成可执行jar包-->
<version>3.0.2</version>
<configuration>
<!-- 指定打包的jar包输出路径 -->
<outputDirectory>
${project.build.directory}/jmeter/lib/ext
</outputDirectory>
<!--不打入jar包的文件类型或者路径 -->
<excludes>
</excludes>
<archive>
<manifest>
<addClasspath>true</addClasspath>
<classpathPrefix>lib/</classpathPrefix>
<mainClass>theMainClass</mainClass>
</manifest>
</archive>
</configuration>
</plugin>
</plugins>
<defaultGoal>clean</defaultGoal><!--defaultGoal:执行构建时默认的goal或phase，必须跟命令行上的参数相同，如jar:jar或者package等-->
</build>
</project>