一张图深度解析Linux共享内存的内核实现
Sailor_forever sailing_9806#163.com
http://blog.csdn.net/sailor_8318/article/details/39484747
PDF版本下载链接 http://download.csdn.net/detail/sailor_8318/7960535
(本原创文章发表于Sailor_forever 的个人blog，未经本人许可，不得用于商业用途。任何个人、媒体、其他网站不得私自抄袭；网络媒体转载请注明出处，增加原文链接，否则属于侵权行为。如有任何问题，请留言或者发邮件给sailing_9806＃163.com)
【摘要】本文首先介绍了众所周知的共享内存API，然后介绍了相关的内核主要数据结构，并逐一分析了shmget、shmat、数据访问、shmdt的内核实现及数据结构之间的动态关系，从数据的关联图即可一窥共享内存的实现机制。
【关键字】共享内存，shmat， smget， mmap，shmid_kernel
1 功能...2
2 示例代码...2
3 主要数据结构及其关系...5
3.1 ipc_params.5
3.2 shmid_kernel6
3.3 kern_ipc_perm..6
3.4 shm_file_data.7
3.5 shm_file_operations.7
3.6 shm_vm_ops.7
3.7 ipc_ops.7
3.8 数据结构之间的关系...8
4 创建or打开share memory. 8
4.1 主流程...8
4.2 Shmget.10
4.3 ipcget_public.10
4.4 newseg.11
4.5 shmem_file_setup.12
4.6 alloc_file.13
4.7 用户态信息...13
5 attach到share memory. 14
5.1 主流程...14
5.2 do_shmat.16
5.3 shm_mmap.17
5.4 shmem_mmap.17
5.5 shm_open.18
5.6 用户态信息...18
6 数据访问...18
6.1 shm_fault.19
6.2 shmem_fault.19
7 Detach shm.. 19
8 删除share memory. 20
9 参考文档...20
System V共享内存作为多进程间通信的最高效手段，是因为：
1、 其将物理内存直接映射为虚拟地址，通过虚拟地址即可直接访问数据，避免了rd/wr等系统调用的开销
2、 其避免了msg及socket通信方式的数据拷贝过程
基本原理介绍可参考“Linux环境进程间通信(五): 共享内存(下)”
/**********************************************************
*实验要求： 创建两个进程，通过共享内存进行通讯。
*功能描述： 本程序申请了上一段程序相同的共享内存块，然后循环向共享中
* 写数据，直至写入“end”。
*日 期： 2010-9-17
*作 者： 国嵌
**********************************************************/
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include "shm_com.h"
/*
* 程序入口
**/
int main(void)
{
int running=1;
void *shared_memory=(void *)0;
struct shared_use_st *shared_stuff;
char buffer[BUFSIZ];
int shmid;
/*创建共享内存*/
shmid=shmget((key_t)1234,sizeof(structshared_use_st),0666|IPC_CREAT);
if(shmid==-1)
{
fprintf(stderr,"shmget failed\n");
exit(EXIT_FAILURE);
}
/*映射共享内存*/
shared_memory=shmat(shmid,(void *)0,0);
if(shared_memory==(void *)-1)
{
fprintf(stderr,"shmat failed\n");
exit(EXIT_FAILURE);
}
printf("Memory attached at %X\n",(int)shared_memory);
/*让结构体指针指向这块共享内存*/
shared_stuff=(struct shared_use_st *)shared_memory;
/*循环的向共享内存中写数据，直到写入的为“end”为止*/
while(running)
{
while(shared_stuff->written_by_you==1)
{
sleep(1);//等到读进程读完之后再写
printf("waiting for client...\n");
}
printf("Ener some text:");
fgets(buffer,BUFSIZ,stdin);
strncpy(shared_stuff->some_text,buffer,TEXT_SZ);
shared_stuff->written_by_you=1;
if(strncmp(buffer,"end",3)==0)
{
running=0; //结束循环
}
}
/*detach共享内存*/
if(shmdt(shared_memory)==-1)
{
fprintf(stderr,"shmdt failed\n");
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
/**********************************************************
*实验要求： 创建两个进程，通过共享内存进行通讯。
*功能描述： 本程序申请和分配共享内存，然后轮训并读取共享中的数据，直至
* 读到“end”。
*日 期： 2010-9-17
*作 者： 国嵌
**********************************************************/
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include "shm_com.h"
/*
* 程序入口
**/
int main(void)
{
int running=1;
void *shared_memory=(void *)0;
struct shared_use_st *shared_stuff;
int shmid;
/*创建共享内存*/
shmid=shmget((key_t)1234,sizeof(structshared_use_st),0666|IPC_CREAT);
if(shmid==-1)
{
fprintf(stderr,"shmget failed\n");
exit(EXIT_FAILURE);
}
/*映射共享内存*/
shared_memory=shmat(shmid,(void *)0,0);
if(shared_memory==(void *)-1)
{
fprintf(stderr,"shmat failed\n");
exit(EXIT_FAILURE);
}
printf("Memory attached at %X\n",(int)shared_memory);
/*让结构体指针指向这块共享内存*/
shared_stuff=(struct shared_use_st *)shared_memory;
/*控制读写顺序*/
shared_stuff->written_by_you=0;
/*循环的从共享内存中读数据，直到读到“end”为止*/
while(running)
{
if(shared_stuff->written_by_you)
{
printf("You wrote:%s",shared_stuff->some_text);
sleep(1); //读进程睡一秒，同时会导致写进程睡一秒，这样做到读了之后再写
shared_stuff->written_by_you=0;
if(strncmp(shared_stuff->some_text,"end",3)==0)
{
running=0; //结束循环
}
}
}
/*删除共享内存*/
if(shmdt(shared_memory)==-1)
{
fprintf(stderr,"shmdt failed\n");
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
通过上面的示例代码我们大概了解了共享内存的用户API，但其是如何实现的呢，让我们来一探究竟。首先介绍相关的主要数据结构。
该数据结构为用户空间和内核空间通信的API，key、flg、size为创建共享内存的必备参数
/*
*Structure that holds the parameters needed by the ipc operations
*(see after)
*/
struct ipc_params {
key_t key;
intflg;
union{
size_t size; /* for shared memories */
intnsems; /* for semaphores */
}u; /* holds thegetnew() specific param */
};
shmid_kernel一个共享内存区在内核态的ipc标识
8 struct shmid_kernel /* private to thekernel */
9 {
10 struct kern_ipc_perm shm_perm;
11 struct file *shm_file; /* 定位共享内存在ramfs中的inode */
12 unsigned long shm_nattch; /* 被映射的次数，为0时才能删除此共享内存区*/
13 unsigned long shm_segsz; /* 为用户态传递下来的共享内存区size*/
14 time_t shm_atim;
15 time_t shm_dtim;
16 time_t shm_ctim;
17 pid_t shm_cprid;
18 pid_t shm_lprid;
19 struct user_struct *mlock_user;
20
21 /* The task created the shmobject. NULL if the task is dead. */
22 struct task_struct *shm_creator;
23 };
kern_ipc_perm保存用户态shm key值和内核态的shmid及其他权限信息
10 /* used by in-kernel data structures*/
11 struct kern_ipc_perm
12 {
13 spinlock_t lock;
14 bool deleted;
15 int id; /* shm的内核标识，同一个key多次映射的shmid可能不一样*/
16 key_t key; /* 用户空间用于识别shm的key标识，该key标识可以静态约定或者根据某个值唯一标识，避免冲突*/
17 kuid_t uid;
18 kgid_t gid;
19 kuid_t cuid;
20 kgid_t cgid;
21 umode_t mode;
22 unsigned long seq;
23 void *security;
24 };
当进程attach到某个共享内存区时，即建立该数据结构，后续所有操作都通过该数据结构访问到其他所有信息。
struct shm_file_data {
intid;
structipc_namespace *ns;
structfile *file;
conststruct vm_operations_struct *vm_ops;
};
static const struct file_operationsshm_file_operations = {
.mmap = shm_mmap,
.fsync = shm_fsync,
.release = shm_release,
};
static const struct vm_operations_structshm_vm_ops = {
.open = shm_open, /* callback for a new vm-area open */
.close = shm_close, /* callback for when the vm-area is released */
.fault = shm_fault,
};
/*
*Structure that holds some ipc operations. This structure is used to unify
*the calls to sys_msgget(), sys_semget(), sys_shmget()
* .routine to call to create a new ipc object. Can be one of newque,
* newary, newseg
* .routine to call to check permissions for a new ipc object.
* Can be one of security_msg_associate, security_sem_associate,
* security_shm_associate
* .routine to call for an extra check if needed
*/
struct ipc_ops {
int(*getnew) (struct ipc_namespace *, struct ipc_params *);
int(*associate) (struct kern_ipc_perm *, int);
int(*more_checks) (struct kern_ipc_perm *, struct ipc_params *);
};
shm_ops.getnew = newseg;
shm_ops.associate = shm_security;
shm_ops.more_checks = shm_more_checks;
随着共享内存的建立、映射、访问等过程，最终会在建立如下的数据信息关联表，通过此表即可完全搞懂共享内存的内部原理。
4 创建or打开share memory
以key为关键字获取shm信息。若在ipc中未创建，则在shm文件系统（tempfs）里分配一个inode，其对应文件为/SYSV-shmid(用户态不可见)，并分配一个file文件描述符指向此inode的dentry，并保存在ipc shm数据结构shmid_kernel里，并返回shmid。若已经创建，则获取shmid即可。
共享内存的物理地址保存在inode的struct address_space*i_mapping域的structradix_tree_root page_tree; /* radix treeof all pages */成员中。共享内存也使用了page cache的框架来管理物理页，但并不是通过read/write等系统调用方式来访问共享内存“文件”。
在内核态建立的相关数据关联信息如下：
黄色是用户态的参数输入，蓝色部分是shmget过程中动态建立的信息，其中shmid为最终返回值。
用systemtap（可参考文章）监测到的函数调用栈信息如下：
-------------------------------------
shmem_alloc_inode(sb=0xf5c3ac00)
0xc1153110 : shmem_alloc_inode+0x0/0x30[kernel]
0xc11a5a50 : alloc_inode+0x20/0x80 [kernel]
0xc11a7ba6 : new_inode_pseudo+0x16/0x60[kernel]
0xc11a7c07 : new_inode+0x17/0x30 [kernel]
0xc115409b : shmem_get_inode+0x2b/0x170[kernel]
0xc11545c4 : shmem_file_setup+0xb4/0x1b0[kernel]
0xc12915b9 : newseg+0x239/0x2a0 [kernel]
0xc128dc51 : ipcget+0x111/0x1d0 [kernel]
0xc1291cf2 : sys_shmget+0x52/0x60 [kernel]
0xc1292b39 : sys_ipc+0x249/0x280 [kernel]
0xc161abb4 : syscall_call+0x7/0xb [kernel]
-------------------------------------
用户空间以key为关键字来区分不同的share memory
SYSCALL_DEFINE3(shmget, key_t, key, size_t,size, int, shmflg)
{
structipc_namespace *ns;
structipc_ops shm_ops;
structipc_params shm_params;
ns= current->nsproxy->ipc_ns;
shm_ops.getnew = newseg;
shm_params.key = key;
shm_params.flg = shmflg;
shm_params.u.size = size;
returnipcget(ns, &shm_ids(ns), &shm_ops, &shm_params);
}
/**
* ipcget_public - get an ipc object or create anew one
* @ns: namespace
* @ids: IPC identifer set
* @ops: the actual creation routine to call
* @params: its parameters
*
* This routine is called by sys_msgget,sys_semget() and sys_shmget()
* when the key is not IPC_PRIVATE.
* It adds a new entry if the key is not found and does somepermission
* /security checkings if the key is found.
*
* On success, the ipc id is returned.
*/
static int ipcget_public(structipc_namespace *ns, struct ipc_ids *ids,
structipc_ops *ops, struct ipc_params *params)
{
ipcp = ipc_findkey(ids,params->key);
if(ipcp == NULL) {
/*key not used */
if(!(flg & IPC_CREAT))
err= -ENOENT;
else
err = ops->getnew(ns,params);
}else {
if(ops->more_checks)
err= ops->more_checks(ipcp, params);
}
}
以key为关键字在现有的share memory实例中查找，查找失败，则ops->getnew(ns,params)创建一个新的shm实例；查找成功，做一些必要的安全性检查即可。
/**
*newseg - Create a new shared memory segment
* @params: ptr to the structure thatcontains key, size and shmflg
*/
static int newseg(struct ipc_namespace *ns,struct ipc_params *params)
{
key_tkey = params->key;
intshmflg = params->flg;
size_tsize = params->u.size;
structshmid_kernel *shp;
int numpages = (size + PAGE_SIZE-1) >> PAGE_SHIFT; /* 计算shm文件大小*/
structfile * file;
shp= ipc_rcu_alloc(sizeof(*shp));
shp->shm_perm.key= key;
shp->shm_perm.mode= (shmflg & S_IRWXUGO);
sprintf(name, "SYSV%08x", key); /* shm文件名称，包含keyid */
file= shmem_file_setup(name, size, acctflag); /* 在shm的tempfs中创建一个文件inode节点，并返回一个文件描述符，文件存在哪个路径了呢？？是个隐藏文件，用户空间看不到！！*/
id= ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
shp->shm_segsz= size;
shp->shm_nattch= 0;
shp->shm_file = file; /* 将file指针保存在ipc shmid_kernel中shp->shm_file 中以备后用 */
/*
* shmid gets reported as "inode#" in /proc/pid/maps.
* proc-ps tools use this. Changing this willbreak them.
*/
file->f_dentry->d_inode->i_ino= shp->shm_perm.id; /* shm ID作为inodenumber */
error= shp->shm_perm.id;
returnerror;
}
/**
*shmem_file_setup - get anunlinked file living in tmpfs
*@name: name for dentry (to be seen in /proc/<pid>/maps
*@size: size to be set for the file
*/
struct file *shmem_file_setup(const char*name, loff_t size, unsigned long flags)
{
interror;
structfile *file;
structinode *inode;
structpath path;
structdentry *root;
error= -ENOMEM;
this.name= name;
this.len= strlen(name);
root= shm_mnt->mnt_root;
path.dentry= d_alloc(root, &this); /*在shm所mount文件系统根目录下创建dentry节点 */
path.mnt= mntget(shm_mnt);
inode= shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0, flags); /* 创建inode节点 */
d_instantiate(path.dentry,inode); /* 将dentry和inode节点关联起来 */
inode->i_size= size;
file= alloc_file(&path, FMODE_WRITE | FMODE_READ,
&shmem_file_operations); /*分配一个file文件描述符指向该inode节点，并指定该文件操作指针为shmem_file_operations */
returnfile;
}
EXPORT_SYMBOL_GPL(shmem_file_setup);
分配一个file描述符，并指向参数中的dentry和inode，并初始化file operations指针
http://lxr.free-electrons.com/source/fs/file_table.c#L166
/**
*alloc_file - allocate and initialize a 'struct file'
* @mnt: the vfsmount on whichthe file will reside
*@dentry: the dentry representing the new file
*@mode: the mode with which the new file will be opened
* @fop: the 'structfile_operations' for the new file
*/
struct file *alloc_file(struct path *path,fmode_t mode,
conststruct file_operations *fop)
{
structfile *file;
file= get_empty_filp();
file->f_path= *path;
file->f_mapping =path->dentry->d_inode->i_mapping;
file->f_mode= mode;
file->f_op = fop;
}
EXPORT_SYMBOL(alloc_file);
drq@ubuntu:/mnt/hgfs/systemtap$ ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x000004d2 32768 drq 666 2052 0
drq@ubuntu:/mnt/hgfs/systemtap/share-m$ cat/proc/sysvipc/shm
key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime rss swap
1234 65536 666 2052 6924 6924 1 1000 1000 1000 1000 1411221835 0 1411221835 4096 0
drq@ubuntu:/mnt/hgfs/systemtap/share-m$
drq@ubuntu:/mnt/hgfs/systemtap/share-m$ cat/proc/meminfo | grep Shmem
Shmem: 144 kB
drq@ubuntu:/mnt/hgfs/systemtap/share-m$mount
/dev/sda1 on / type ext4(rw,errors=remount-ro)
tmpfs on /run type tmpfs(rw,noexec,nosuid,size=10%,mode=0755)
none on /run/shm type tmpfs (rw,nosuid,nodev)
drq@ubuntu:/mnt/hgfs/systemtap/share-m$ df-h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 39G 17G 20G 47% /
udev 494M 4.0K 494M 1% /dev
tmpfs 201M 812K 200M 1% /run
none 5.0M 0 5.0M 0% /run/lock
none 501M 152K 501M 1% /run/shm
以shmid attach到shm上，最终在进程空间分配一块内存区域vm_area_struct指向shm文件的物理页，加入进程的内存描述符current->mm，此vm_area_struct可通过cat /proc/$pid/maps查看。
在内核态建立的数据关联信息如下：
红色部分为shmat期间在内核新建立的数据信息，并最终返回vm_start即用户可直接访问的用户态地址。
用systemtap监测到的函数调用栈信息如下：
-------------------------------------
shmem_mmap(file=0xc4b42e40 vma=0xddacb000)
0xc11544e0 : shmem_mmap+0x0/0x30 [kernel]
0xc12918d2 : shm_mmap+0x22/0x60 [kernel]
0xc1169380 : mmap_region+0x3d0/0x590 [kernel]
0xc1169726 : do_mmap_pgoff+0x1e6/0x2d0[kernel]
0xc12925af : do_shmat+0x30f/0x3c0 [kernel]
0xc1292af2 : sys_ipc+0x202/0x280 [kernel]
0xc161abb4 : syscall_call+0x7/0xb [kernel]
-------------------------------------
-------------------------------------
shm_open(vma=0xddacb000)
0xc1291850 : shm_open+0x0/0x60 [kernel]
0xc12918f3 : shm_mmap+0x43/0x60 [kernel]
0xc1169380 : mmap_region+0x3d0/0x590 [kernel]
0xc1169726 : do_mmap_pgoff+0x1e6/0x2d0[kernel]
0xc12925af : do_shmat+0x30f/0x3c0 [kernel]
0xc1292af2 : sys_ipc+0x202/0x280 [kernel]
0xc161abb4 : syscall_call+0x7/0xb [kernel]
-------------------------------------
建立share memory后，以shmid进行后续访问操作
SYSCALL_DEFINE3(shmat, int, shmid, char__user *, shmaddr, int, shmflg)
{
err= do_shmat(shmid, shmaddr, shmflg, &ret);
return(long)ret;
}
/*
*Fix shmaddr, allocate descriptor, map shm, add attach descriptor to lists.
*/
long do_shmat(int shmid, char __user*shmaddr, int shmflg, ulong *raddr)
{
struct shmid_kernel *shp;
unsignedlong addr;
unsignedlong size;
structfile * file;
structpath path;
ns= current->nsproxy->ipc_ns;
shp = shm_lock_check(ns, shmid); /*通过shmid找到ipc数据结构shmid_kernel */
path= shp->shm_file->f_path; /* 获得共享文件的路径 */
path_get(&path);
shp->shm_nattch++;
size =i_size_read(path.dentry->d_inode); /*根据dentry找到inode，获取文件大小 */
sfd= kzalloc(sizeof(*sfd), GFP_KERNEL); /*每个进程自身维护的信息*/
file = alloc_file(&path,f_mode,
is_file_hugepages(shp->shm_file) ?
&shm_file_operations_huge:
&shm_file_operations); /* 分配一个新文件描述符指向共享文件，文件访问指针为shm_file_operations)*/
file->private_data= sfd;
file->f_mapping= shp->shm_file->f_mapping; /*指向共享文件的address_space */
sfd->id= shp->shm_perm.id; /* 保存shmid*/
sfd->ns= get_ipc_ns(ns);
sfd->file = shp->shm_file;/*指向共享文件的file描述符 */
sfd->vm_ops = NULL;
user_addr = do_mmap (file, addr,size, prot, flags, 0);
*raddr = user_addr; /* 返回在进程空间分配的虚拟地址空间指针*/
}
do_mmap最终调用shm_file_operations的shm_mmap
static int shm_mmap(struct file * file,struct vm_area_struct * vma)
{
structshm_file_data *sfd = shm_file_data(file);
intret;
ret =sfd->file->f_op->mmap(sfd->file, vma); /*最终调用shmem_file_setup阶段创建的shm里的file文件的f_op指针shmem_file_operations中的mmap实现shmem_mmap*/
sfd->vm_ops= vma->vm_ops; /* shmem_vm_ops */
vma->vm_ops =&shm_vm_ops; /* 将shmem_vm_ops替换为shm_vm_ops，以便vm_ops的其他地方可以进行额外封装处理如shm_open */
shm_open(vma);
returnret;
}
static int shmem_mmap(struct file *file,struct vm_area_struct *vma)
{
file_accessed(file);
vma->vm_ops= &shmem_vm_ops;
vma->vm_flags|= VM_CAN_NONLINEAR;
return0;
}
进程attache到shm后，更新相关访问信息如时间，attach的个数
/* This is called by fork, once for everyshm attach. */
static void shm_open(struct vm_area_struct*vma)
{
structfile *file = vma->vm_file;
structshm_file_data *sfd = shm_file_data(file);
structshmid_kernel *shp;
shp= shm_lock(sfd->ns, sfd->id);
BUG_ON(IS_ERR(shp));
shp->shm_atim= get_seconds();
shp->shm_lprid= task_tgid_vnr(current);
shp->shm_nattch++;
shm_unlock(shp);
}
进程attach到shm后，其nattch会增加
drq@ubuntu:/mnt/hgfs/systemtap$ ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x000004d2 262144 drq 666 2052 1
可以从进程mm中看到映射的虚拟地址空间
drq@ubuntu:/mnt/hgfs/systemtap/share-m$ ps-ef | grep sh-read
drq 11803 5829 99 02:00 pts/7 00:00:17 ./sh-read
b76f0000-b76f1000为shm映射后的虚拟地址空间，/SYSV000004d2为shm的虚拟文件
drq@ubuntu:/mnt/hgfs/systemtap/share-m$ cat/proc/11803/maps | grep SYS
b76f0000-b76f1000 rw-s 00000000 00:04262144 /SYSV000004d2 (deleted)
用户空间经过shmat后，得到用于访问共享内存的虚拟地址，即可以通过该地址直接访问共享的物理内存。但因为页表尚未建立起来，因此触发page fault，然后建立页表。
-------------------------------------
shmem_fault(vma=0xddacb000 vmf=0xc25cbe7c)
0xc1155eb0 : shmem_fault+0x0/0x90 [kernel]
0xc12911a4 : shm_fault+0x14/0x20 [kernel]
0xc11606ce : __do_fault+0x6e/0x550 [kernel]
0xc11631cf : handle_pte_fault+0x8f/0xaf0[kernel]
0xc1164d4d : handle_mm_fault+0x1dd/0x280[kernel]
0xc161ddea : do_page_fault+0x15a/0x4b0[kernel]
0xc161b2a3 : error_code+0x67/0x6c [kernel]
-------------------------------------
在shm_mmap的最后将vm_operations的操作指针更新为了shm_vm_ops，其page fault处理函数为shm_fault。其最终仍然调用的是shmem_vm_ops的shmem_fault
static int shm_fault(struct vm_area_struct*vma, struct vm_fault *vmf)
{
structfile *file = vma->vm_file;
structshm_file_data *sfd = shm_file_data(file);
returnsfd->vm_ops->fault(vma,vmf);
}
shmem_fault根据产生缺页异常的线性地址找到对应的物理页（vma->vm_file->f_path.dentry->d_inode），并将这个物理页加入页表，之后用户就可以像访问本地数据一样直接访问共享内存
static int shmem_fault(structvm_area_struct *vma, struct vm_fault *vmf)
{
struct inode *inode =vma->vm_file->f_path.dentry->d_inode;
interror;
intret;
if(((loff_t)vmf->pgoff << PAGE_CACHE_SHIFT) >= i_size_read(inode))
returnVM_FAULT_SIGBUS;
error= shmem_getpage(inode, vmf->pgoff,&vmf->page, SGP_CACHE, &ret);
if(error)
return((error == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS);
returnret | VM_FAULT_LOCKED;
}
Detach shm时只会将进城对应的mm_struct信息release，但不会删除shm自身。其中shm_nattch--。
-------------------------------------
shm_close(vma=0xddadf8f0)
0xc1291910 : shm_close+0x0/0xb0 [kernel]
0xc1167086 : remove_vma+0x26/0x60 [kernel]
0xc1168a5c : do_munmap+0x21c/0x2e0 [kernel]
0xc129272b : sys_shmdt+0x9b/0x140 [kernel]
0xc1292b1b : sys_ipc+0x22b/0x280 [kernel]
0xc161abb4 : syscall_call+0x7/0xb [kernel]
-------------------------------------
-------------------------------------
shm_release(ino=0xf69f9e50 file=0xddbdb540)
0xc1291330 : shm_release+0x0/0x40 [kernel]
0xc1190ab6 : fput+0xe6/0x210 [kernel]
0xc1167092 : remove_vma+0x32/0x60 [kernel]
0xc1168a5c : do_munmap+0x21c/0x2e0 [kernel]
0xc129272b : sys_shmdt+0x9b/0x140 [kernel]
0xc1292b1b : sys_ipc+0x22b/0x280 [kernel]
0xc161abb4 : syscall_call+0x7/0xb [kernel]
-------------------------------------
相关命令如下：
drq@ubuntu:/mnt/hgfs/systemtap$ ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x00000000 262144 drq 666 2052 1 dest
drq@ubuntu:/mnt/hgfs/systemtap$ ipcrm -m262144
drq@ubuntu:/mnt/hgfs/systemtap$ ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
程序可以通过shmctl IO调用删除shm。
共享内存代码示例
http://blog.csdn.net/cschengvdn/article/details/21086711
Linux环境进程间通信(五): 共享内存(下)
http://www.ibm.com/developerworks/cn/linux/l-ipc/part5/index2.html
