我最近下载了 Intel XDK IOT 版本并使用了 LED 引脚 13 闪烁示例。
然后我将程序上传到爱迪生上,但它出现了一些错误;其中之一是找不到 MRAA 模块。附带的示例代码是:
main.js:
var mraa = new require("mraa"); //require mraa
console.log('MRAA Version: ' + mraa.getVersion()); //write the mraa version to the Intel XDK console
var myOnboardLed = new mraa.Gpio(13); //LED hooked up to digital pin 13 (or built in pin on Galileo Gen1 & Gen2)
myOnboardLed.dir(mraa.DIR_OUT); //set the gpio direction to output
var ledState = true; //Boolean to hold the state of Led
periodicActivity(); //call the periodicActivity function
function periodicActivity()
{
myOnboardLed.write(ledState?1:0); //if ledState is true then write a '1' (high) otherwise write a '0' (low)
ledState = !ledState; //invert the ledState
setTimeout(periodicActivity,1000); //call the indicated function after 1 second (1000 milliseconds)
}
包.JSON:
{
"name": "Onboard LED Blink App",
"description": "",
"version": "0.0.0",
"main": "main.js",
"engines": {
"node": ">=0.10.0"
},
"dependencies": {
}
}
根据您使用的 Edison 固件版本,Node.js 的 mraa 模块可能无法正确安装。要安装最新版本的 mraa,请将 Edison 连接到互联网(通过 wifi)并通过 ssh 或串行终端运行以下命令
echo "src mraa-upm http://iotdk.intel.com/repos/1.1/intelgalactic" > /etc/opkg/mraa-upm.conf
okpg update
opkg upgrade
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系:hwhale#tublm.com(使用前将#替换为@)