NETCONF协议netopeer软件安装与环境搭建
目录
- NETCONF协议netopeer软件安装与环境搭建
- 目录
- 简介
- 相关网站参考
- 准备工作
- 手动编译安装部份依赖包
- 手动编译netopeer
- 启动与验证
简介
最近工作涉及一些NETCONF协议调研与验证,NETCONF的自动化配置系统采用Client/Server架构,而netopeer即实现了netconf的C/S框架的开源项目,谨以此文总结记录一下netopeer环境搭建和简单使用过程。
Netopeer是基于开源项目libnetconf库完成的,已实现client和server端的代码。主要涉及的组件为netopeer-cli和netopeer-server;其中netopeer-cli为一个CLI程序,允许通过该程序连接到netconf server,和操纵它的配置数据;netopeer-server为一个netconf服务器端的守护进程,允许与netconf client建立连接,接收配置数据等操作。除了这两个重要的模块,netopeer项目还包含了libnetconf transAPI模块举例,位于项目源码transAPI/路径下,例如cfgsystem模块,实现的是一个ietf-system数据模型。
本文主要介绍使用ubuntu-14.04.5-server 64位系统作为基础环境。
相关网站参考
- [ Libnetconf文档网站 ]
- [ Netopeer项目 ]
- [ Libnetconf项目 ]
- [ Pyang项目 ]
- [ Libssh项目 ]
准备工作
1) ubuntu官网下载ubuntu系统安装ISO – ubuntu-14.04.5-server-amd64.iso
2) 安装ubuntu14.04.5 server系统
3) 安装必要的依赖包
# apt-get install libtool python-argparse libtool-bin python-sphinx libffi-dev libxml2-dev libxslt1-dev libcurl4-openssl-dev xsltproc python-setuptools cmake zlib1g-dev libssl-dev python-libxml2 libaugeas-dev openssh-server libreadline-dev
手动编译安装部份依赖包
pyang
# git clone https://github.com/mbj4668/pyang.git
# cd pyang
# python setup.py install
libssh (>=0.6.4)
下载libssh源码包(https://git.libssh.org/projects/libssh.git)
# cd libssh
# mkdir build
# cd build
# cmake ..
# make
# make install
libnetconf
# git clone https://github.com/CESNET/libnetconf.git
# cd libnetconf
# ./configure
# make
# make install
手动编译netopeer
下载netopeer源码
# git clone https://github.com/CESNET/netopeer.git
编译安装netopeer-server
# cd netopeer/server
# ./configure
# make
# make install
编译安装netopeer-cli
# cd netopeer/cli
# ./configure
# make
# make install
启动与验证
启动netopeer server
# netopeer-server -d
默认监听端口x.x.x.x:830,连接的用户名密码为系统用户
验证netopeer-cli与netopeer-server连接
运行netopeer-cli,连接netopeer server
# netopeer-cli
netconf> connect localhost
netconf> get-config startup
其它操作
a) 配置netopeer server模块
# netopeer-configurator
b) 检查默认启动的模块
# netopeer-manager list
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系:hwhale#tublm.com(使用前将#替换为@)