程序员经验分享-hwhale

ubuntu搭建APT源简单方法

2023-05-16

一、为什么需要搭建APT源

原因如下：

1、在公司内网离线情况下，ubuntu无法通过apt原生源进行下载

2、有些源国内无法正常访问，需要翻墙

基于以上原因，需要自建APT源

二、准备条件

  1. 需要能够上网的电脑，最好能够登录github、google等外网电脑
  2. 需要一台ubuntu的机器，磁盘要足够大

三、APT环境搭建

3.1、安装apt-mirror软件

sudo apt-get install apt-mirror

3.2、修改mirror.list配置文件

sudo mkdir -p /var/www/html
sudo vi /etc/apt/mirror.list

我的配置文件如下：

############# config ##################
# 设置数据存储目录,路径必须提前存在
# set base_path    /var/spool/apt-mirror
set base_path /var/www/html

# 设置镜像存储位置
# set mirror_path  $base_path/mirror

# 设置临时下载索引位置
# set skel_path    $base_path/skel

# 设置日志，URLs和MD5校验信息存储位置
# set var_path     $base_path/var

# 配置删除过期源脚本位置（默认不删除，方便安装旧版本软件）
# set cleanscript $var_path/clean.sh

# 设置默认架构，i386/amd64，默认下载与本机相同的架构
# set defaultarch  <running host architecture>
set defaultarch amd64

# 设定下载后运行的脚本位置
# set postmirror_script $var_path/postmirror.sh

# 设置是否执行 下载后的脚本操作，默认是1(但是默认没有postmirror.sh脚本）
# set run_postmirror 0

# 设置下载线程数
set nthreads     20

# 是否替换URL中的波浪线，替换成%7E（HTML代码），否则会跳过不进行下载
set _tilde 0
#
############# end config ##############

# ubuntu的APT软件源
#deb https://mirrors.ustc.edu.cn/ubuntu/ bionic main restricted universe multiverse
#deb-src https://mirrors.ustc.edu.cn/ubuntu/ bionic main restricted universe multiverse
#deb https://mirrors.ustc.edu.cn/ubuntu/ bionic-updates main restricted universe multiverse
#deb-src https://mirrors.ustc.edu.cn/ubuntu/ bionic-updates main restricted universe multiverse
#deb https://mirrors.ustc.edu.cn/ubuntu/ bionic-backports main restricted universe multiverse
#deb-src https://mirrors.ustc.edu.cn/ubuntu/ bionic-backports main restricted universe multiverse
#deb https://mirrors.ustc.edu.cn/ubuntu/ bionic-security main restricted universe multiverse
#deb-src https://mirrors.ustc.edu.cn/ubuntu/ bionic-security main restricted universe multiverse
#deb https://mirrors.ustc.edu.cn/ubuntu/ bionic-proposed main restricted universe multiverse
#deb-src https://mirrors.ustc.edu.cn/ubuntu/ bionic-proposed main restricted universe multiverse

#clean http://mirrors.ustc.edu.cn ubuntu

# nvidia-docker2 源
#deb https://nvidia.github.io/libnvidia-container/stable/ubuntu18.04/$(ARCH) / 
#直接使用nvidia-docker2 源地址会有问题，需要修改如下才可以
deb https://nvidia.github.io/libnvidia-container/stable/ubuntu18.04/amd64 /
#deb https://nvidia.github.io/libnvidia-container/experimental/ubuntu18.04/$(ARCH) /
deb https://nvidia.github.io/nvidia-container-runtime/stable/ubuntu18.04/amd64 /
#deb https://nvidia.github.io/nvidia-container-runtime/experimental/ubuntu18.04/$(ARCH) /
deb https://nvidia.github.io/nvidia-docker/ubuntu18.04/amd64 /

# docker-ce源
deb https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/ubuntu bionic stable

# ros源
deb http://mirrors.tuna.tsinghua.edu.cn/ros/ubuntu/ bionic main

# vscode源
#deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main

# bazel源
deb [arch=amd64] https://storage.googleapis.com/bazel-apt stable jdk1.8

clean https://nvidia.github.io ubuntu
clean https://mirrors.tuna.tsinghua.edu.cn ubuntu
clean http://mirrors.tuna.tsinghua.edu.cn/ros/ubuntu
clean http://packages.microsoft.com/repos/code

3.3、开始下载镜像软件

sudo apt-miiror

下载镜像过程时间比较长，需要耐心等待。执行过程如下：

root@HANZHIWEI02:~# apt-mirror
Downloading 57 index files using 20 threads...
Begin time: Fri Jan 28 14:20:18 2022
[20]... [19]... [18]... [17]... [16]... [15]... [14]... [13]... [12]... [11]... [10]... [9]... [8]... [7]... [6]... [5]... [4]... [3]... [2]... [1]... [0]...
End time: Fri Jan 28 14:20:29 2022

Processing translation indexes: [TTTTTT]

Downloading 0 translation files using 0 threads...
Begin time: Fri Jan 28 14:20:29 2022
[0]...
End time: Fri Jan 28 14:20:29 2022

Processing DEP-11 indexes: [DDDDDD]

Downloading 0 dep11 files using 0 threads...
Begin time: Fri Jan 28 14:20:29 2022
[0]...
End time: Fri Jan 28 14:20:29 2022

Processing indexes: [PPPPPP]

2.2 GiB will be downloaded into archive.
Downloading 707 archive files using 20 threads...
Begin time: Fri Jan 28 14:20:30 2022
[20]... [19]... [18]... [17]... [16]... [15]... [14]... [13]... [12]... [11]... [10]... [9]... [8]... [7]... [6]... [5]... [4]... [3]... [2]... [1]... [0]...
End time: Fri Jan 28 14:31:46 2022

4.1 GiB in 1406 files and 2 directories can be freed.
Run /mnt/e/ubuntu-apt/var/clean.sh for this purpose.

Running the Post Mirror script ...
(/var/www/html/var/postmirror.sh)

Post Mirror script has completed. See above output for any possible errors.

3.4、安装nginx

sudo apt-get install nginx

3.5、配置nginx的服务

sudo vi /etc/nginx/sites-available/default

我的配置文件如下：

##
# You should look at the following URL's in order to grasp a solid understanding
# of Nginx configuration files in order to fully unleash the power of Nginx.
# https://www.nginx.com/resources/wiki/start/
# https://www.nginx.com/resources/wiki/start/topics/tutorials/config_pitfalls/
# https://wiki.debian.org/Nginx/DirectoryStructure
#
# In most cases, administrators will remove this file from sites-enabled/ and
# leave it as reference inside of sites-available where it will continue to be
# updated by the nginx packaging team.
#
# This file will automatically load configuration files provided by other
# applications, such as Drupal or Wordpress. These applications will be made
# available underneath a path with that package name, such as /drupal8.
#
# Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples.
##

# Default server configuration
#
server {
    listen 80 default_server;
        # 设置中文编码支持
    charset utf-8; 
    # listen [::]:80 default_server;

    # SSL configuration
    #
    #listen 443 ssl default_server;
    #listen [::]:443 ssl default_server;
    #
    # Note: You should disable gzip for SSL traffic.
    # See: https://bugs.debian.org/773332
    #
    # Read up on ssl_ciphers to ensure a secure configuration.
    # See: https://bugs.debian.org/765782
    #
    # Self signed certs generated by the ssl-cert package
    # Don't use them in a production server!
    #
    # include snippets/snakeoil.conf;

    #ssl_certificate   /mnt/e/ubuntu-apt/key/server.crt;
    #ssl_certificate_key  /mnt/e/ubuntu-apt/key/server.key;
    #ssl_session_timeout 5m;
    #ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    #ssl_ciphers AESGCM:ALL:!DH:!EXPORT:!RC4:+HIGH:!MEDIUM:!LOW:!aNULL:!eNULL;
    #ssl_prefer_server_ciphers  on;

    #ssl_ciphers  HIGH:!aNULL:!MD5;


    # 显示目录
    autoindex on;
    
    # 镜像所在的目录
    root /var/www/html;

    # Add index.php to the list if you are using PHP
    index index.html index.htm index.nginx-debian.html;

    # server_name _;
    server_name <本机ip地址>;

    location / {
        # First attempt to serve request as file, then
        # as directory, then fall back to displaying a 404.
        try_files $uri $uri/ =404;
        #autoindex on;
                #autoindex_exact_size off;
                #autoindex_localtime on;
    }

    # pass PHP scripts to FastCGI server
    #
    #location ~ \.php$ {
    #   include snippets/fastcgi-php.conf;
    #
    #   # With php-fpm (or other unix sockets):
    #   fastcgi_pass unix:/var/run/php/php7.0-fpm.sock;
    #   # With php-cgi (or other tcp sockets):
    #   fastcgi_pass 127.0.0.1:9000;
    #}

    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #
    #location ~ /\.ht {
    #   deny all;
    #}
}


# Virtual Host configuration for example.com
#
# You can move that to a different file under sites-available/ and symlink that
# to sites-enabled/ to enable it.
#
#server {
#   listen 80;
#   listen [::]:80;
#
#   server_name example.com;
#
#   root /var/www/example.com;
#   index index.html;
#
#   location / {
#       try_files $uri $uri/ =404;
#   }
#}

3.6、重启 nginx 服务

sudo service nginx restart

在浏览器打开http://IP,能够考到以下页面，这表示搭建成功

image-20220128144010463

四、修改内网APT源

经过第三章内容， 已经搭建好了简易的APT镜像源，现在只需要将内网电脑上的APT源修改为自己搭建的源即可

修改/etc/apt/sources.list文件

sudo vi  /etc/apt/sources.list

将下面内容：

deb https://repo.t3caic.com/repository/apt-aliyun/ bionic main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-security main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-updates main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-proposed main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-backports main restricted universe multiverse

# docker
#deb [arch=amd64] https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/ubuntu bionic stable

# nvidia-docker2
deb https://nvidia.github.io/libnvidia-container/stable/ubuntu18.04/$(ARCH) /

deb https://nvidia.github.io/libnvidia-container/experimental/ubuntu18.04/$(ARCH) /

deb https://nvidia.github.io/nvidia-container-runtime/stable/ubuntu18.04/$(ARCH) /

deb https://nvidia.github.io/nvidia-container-runtime/experimental/ubuntu18.04/$(ARCH) /

deb https://nvidia.github.io/nvidia-docker/ubuntu18.04/$(ARCH) /

# ros
deb https://mirrors.tuna.tsinghua.edu.cn/ros/ubuntu/ bionic main

# vscode
deb [arch=amd64,arm64,armhf] https://packages.microsoft.com/repos/code stable main

# bazel
deb [arch=amd64] https://storage.googleapis.com/bazel-apt stable jdk1.8

替换为以下内容即可：

  1. 在url中添加自己的ip地址
  2. https需要替换为http，因为搭建的nginx服务没有启用ssl验证

deb https://repo.t3caic.com/repository/apt-aliyun/ bionic main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-security main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-updates main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-proposed main restricted universe multiverse
deb https://repo.t3caic.com/repository/apt-aliyun/ bionic-backports main restricted universe multiverse

# docker
#deb [arch=amd64] http://<自己搭建的ip地址>/mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/ubuntu bionic stable

# nvidia-docker2
deb http://<自己搭建的ip地址>/nvidia.github.io/libnvidia-container/stable/ubuntu18.04/$(ARCH) /

deb http://<自己搭建的ip地址>/nvidia.github.io/libnvidia-container/experimental/ubuntu18.04/$(ARCH) /

deb http://<自己搭建的ip地址>/nvidia.github.io/nvidia-container-runtime/stable/ubuntu18.04/$(ARCH) /

deb http://<自己搭建的ip地址>/nvidia.github.io/nvidia-container-runtime/experimental/ubuntu18.04/$(ARCH) /

deb http://<自己搭建的ip地址>/nvidia.github.io/nvidia-docker/ubuntu18.04/$(ARCH) /

# ros
deb http://<自己搭建的ip地址>/mirrors.tuna.tsinghua.edu.cn/ros/ubuntu/ bionic main

# vscode
deb [arch=amd64,arm64,armhf] http://<自己搭建的ip地址>/packages.microsoft.com/repos/code stable main

# bazel
deb [arch=amd64] http://<自己搭建的ip地址>/storage.googleapis.com/bazel-apt stable jdk1.8

经过以上步骤，被隔离在内网的电脑能够通过可以访问外网服务电脑来安装所需的apt。

五、rosdep离线源的搭建部署

5.1、解决rosdep init问题

在内网离线执行rosdep init的时候有可能会遇到以下问题：

hanzhiwei@T4-046:~$ sudo rosdep init
ERROR: cannot download default sources list from:
https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/sources.list.d/20-default.list
Website may be down.

解决方案一：

  1. 将20-default.list下载下来

  2. 将20-default.list文件放到/etc/ros/rosdep/sources.list.d目录即可，如果该目录不存在可以新建

解决方案二：

  1. 将20-default.list下载下来

  2. 按照apt源的方式，放到nginx的/var/www/html/raw.githubusercontent.com/ros/rosdistro/master/rosdep/sources.list.d目录下

  3. 修改/usr/lib/python2.7/dist-packages/rosdep2/sources_list.py文件，将：

    DEFAULT_SOURCES_LIST_URL = 'https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/sources.list.d/20-default.list'

    修改为：

    DEFAULT_SOURCES_LIST_URL = 'http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/sources.list.d/20-default.list'

    即可

5.2、解决rosdep update问题

在内网环境新执行rosdep update汇报以下问题：

hanzhiwei@T4-046:~$ rosdep update
reading in sources list data from /etc/ros/rosdep/sources.list.d
ERROR: unable to process source [https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml]:
<urlopen error [Errno 0] Error> (https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml)
ERROR: unable to process source [https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml]:
<urlopen error [Errno 0] Error> (https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml)
ERROR: unable to process source [https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml]:
<urlopen error [Errno 0] Error> (https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml)
ERROR: unable to process source [https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml]:
<urlopen error [Errno 0] Error> (https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml)

解决方法如下：

  1. 将以下内容下载下来，按照APT源搭建方式，放到nginx/var/www/html下的对应目录下

    https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml

    https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml

    https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml

    https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml

    https://raw.githubusercontent.com/ros/rosdistro/master/releases/fuerte.yaml

    https://raw.githubusercontent.com/ros/rosdistro/master/index-v4.yaml

    https://raw.github.com/ros/rosdistro/master/releases/targets.yaml

  2. 修改20-default.list文件内容

    sudo vi /etc/ros/rosdep/sources.list.d/20-default.list

    将以下内容：

    # os-specific listings first
    yaml https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml osx

    # generic
    yaml https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml
    yaml https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml
    yaml https://raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml
    gbpdistro https://raw.githubusercontent.com/ros/rosdistro/master/releases/fuerte.yaml fuerte

    # newer distributions (Groovy, Hydro, ...) must not be listed anymore, they are being fetched from the rosdistro index.yaml instead

    修改为：

    # os-specific listings first
    yaml http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml osx

    # generic
    yaml http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml
    yaml http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml
    yaml http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml
    gbpdistro http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/releases/fuerte.yaml fuerte

    # newer distributions (Groovy, Hydro, ...) must not be listed anymore, they are being fetched from the rosdistro index.yaml instead

  3. 修改rep3.py文件

    sudo vi /usr/lib/python2.7/dist-packages/rosdep2/rep3.py

    将以下内容：

    REP3_TARGETS_URL = 'https://raw.github.com/ros/rosdistro/master/releases/targets.yaml'

    修改为：

    REP3_TARGETS_URL = 'http://<自己搭建的ip地址>/raw.github.com/ros/rosdistro/master/releases/targets.yaml'

  4. 修改__init__.py文件

    sudo vi /usr/lib/python2.7/dist-packages/rosdistro/__init__.py

    将以下内容：

    DEFAULT_INDEX_URL = 'https://raw.githubusercontent.com/ros/rosdistro/master/index-v4.yaml'

    修改为：

    DEFAULT_INDEX_URL = 'http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/index-v4.yaml'

  5. 已上修改好后，如果直接执行rosdep update,会发现以下错误

    root@T4-046:~# rosdep update
    reading in sources list data from /etc/ros/rosdep/sources.list.d
    Warning: running 'rosdep update' as root is not recommended.
    You should run 'sudo rosdep fix-permissions' and invoke 'rosdep update' again without sudo.
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/releases/fuerte.yaml
    Query rosdistro index http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/index-v4.yaml
    Add distro "ardent"
    ERROR: error loading sources list:
    HTTP Error 404: Not Found (http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/ardent/distribution.yaml)

  6. 这是因为在index-v4.yaml文件中还有部分文件需要进行下载，根据错误提示和对index-v4.yaml文件进行内容解读，发现还需要下载以下文件，并放到nginx/var/www/html下的对应目录下

    https://raw.githubusercontent.com/ros/rosdistro/master/ardent/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/bouncy/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/crystal/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/dashing/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/eloquent/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/foxy/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/galactic/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/groovy/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/hydro/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/indigo/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/jade/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/kinetic/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/lunar/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/melodic/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/noetic/distribution.yaml
    https://raw.githubusercontent.com/ros/rosdistro/master/rolling/distribution.yaml

  7. 以上文件下载好后，再执行rosdep update即可完成相关操作，执行过程如下

    root@T4-046:~# rosdep update
    reading in sources list data from /etc/ros/rosdep/sources.list.d
    Warning: running 'rosdep update' as root is not recommended.
    You should run 'sudo rosdep fix-permissions' and invoke 'rosdep update' again without sudo.
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/osx-homebrew.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/base.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/python.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/rosdep/ruby.yaml
    Hit http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/releases/fuerte.yaml
    Query rosdistro index http://<自己搭建的ip地址>/raw.githubusercontent.com/ros/rosdistro/master/index-v4.yaml
    Add distro "ardent"
    Add distro "bouncy"
    Add distro "crystal"
    Add distro "dashing"
    Add distro "eloquent"
    Add distro "foxy"
    Add distro "galactic"
    Add distro "groovy"
    Add distro "hydro"
    Add distro "indigo"
    Add distro "jade"
    Add distro "kinetic"
    Add distro "lunar"
    Add distro "melodic"
    Add distro "noetic"
    Add distro "rolling"
    updated cache in /root/.ros/rosdep/sources.cache

5.3、nginx下的目录结构

下载对应文件，存放在nginx目录结构如下，仅供参考：

└── var
└── www
└── html
├── raw.github.com
│ └── ros
│ └── rosdistro
│ └── master
│ └── releases
│ └── targets.yaml
└── raw.githubusercontent.com
└── ros
└── rosdistro
└── master
├── ardent
│ └── distribution.yaml
├── bouncy
│ └── distribution.yaml
├── crystal
│ └── distribution.yaml
├── dashing
│ └── distribution.yaml
├── eloquent
│ └── distribution.yaml
├── foxy
│ └── distribution.yaml
├── galactic
│ └── distribution.yaml
├── groovy
│ └── distribution.yaml
├── hydro
│ └── distribution.yaml
├── index-v4.yaml
├── indigo
│ └── distribution.yaml
├── jade
│ └── distribution.yaml
├── kinetic
│ └── distribution.yaml
├── lunar
│ └── distribution.yaml
├── melodic
│ └── distribution.yaml
├── noetic
│ └── distribution.yaml
├── releases
│ └── fuerte.yaml
├── rolling
│ └── distribution.yaml
└── rosdep
├── base.yaml
├── osx-homebrew.yaml
├── python.yaml
├── ruby.yaml
└── sources.list.d
└── 20-default.list

参考文档

http://t.zoukankan.com/superbi-p-13409529.html
https://www.cnblogs.com/zhjblogs/p/14875296.html

https://www.jianshu.com/p/663eac18665a

本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)

Ubuntu

APT

源简单方法

ubuntu搭建APT源简单方法 的相关文章

随机推荐

  • 2020/2/21 Linux Socket编程 高级篇——广播

    广播 xff1a 实现一对多的通信 SO BROADCAST选项 它控制了UDP套接字是否能发广播数据报 xff0c 选项类型是int xff0c 非零表示 是 只有UDP能用 xff0c TCP不能 如果是一个广播地址 xff0c 但SO

  • 大小端字节序(Big Endian和Little Endian)

    那么何为字节序 xff08 Endia xff09 呢 xff1f Big Endian是指低地址存放最高有效字节 xff08 MSB xff09 xff0c 而Little Endian则是低地址存放最低有效字节 xff08 LSB xf

  • GPS定位及通信协议解析

    1 简介 上图为某公司的GPS定位模块 xff0c 自己在使用其进行GPS定位过程中学习到的知识分享给大家 主要参数如下 半双工 UART 3 3V TTL 电平 RS232 IIC CAN 接口输出 xff0c 更快速的应用 xff1b

  • JVM系列（八）：堆（Heap）的相关知识介绍

    目录 1 JVM堆的概念 2 JVM堆的特点 3 JVM堆的内部结构 3 1 组成 3 2 堆内存内部空间所占比例 3 3 永久代和元空间区别 4 堆空间的大小设置 5 堆空间垃圾回收 1 JVM堆的概念 JVM中的堆是用来存放对象的内存空

  • C++读写TIF格式

    参考文章 xff1a xff08 1 xff09 https www cnblogs com gywei p 3393816 html xff08 2 xff09 https blog csdn net han jiang xue arti

  • matlab Fourier变换--方波信号的分解与重建

    N 61 200 采用的数据点数 dt 61 4 N 采样的间隔 for n 61 1 N 生成一个方波 if n dt gt 61 2 x n 61 0 8 else x n 61 0 8 end end figure subplot 2

  • matlab 小波分析--高通滤波器和低通滤波器

    xff08 一 xff09 加载一个尺度滤波器 load db8 w 61 db8 figure subplot 4 2 1 stem w title 39 原尺度滤波器 39 计算4个滤波器 Lo D Hi D Lo R Hi R 61

  • C/C++中rand() 函数产生随机数与srand()设置随机数种子

    xff08 1 xff09 rand 产生随机数 xff0c 输出的随机数序列是确定的 xff0c 即每次运行结果一致 include lt iostream gt int main int i j for i 61 0 i lt 10 i

  • matlab与数字图像处理--膨胀和腐蚀

    对于初学者 xff0c 参考一篇很好的说明 xff1a https blog csdn net alw 123 article details 83868878 左边是一个二值化的测试图像 xff0c 白色为图像元素 xff0c 黑色为背景

  • Emmet语法

    Emmet语法 1 1 快速生成HTML结构语法1 2 快速生成CSS样式语法1 3 快速格式化代码 Emmet语法的前身是Zen coding 它使用缩写 来提高html css的编写速度 Vscode内部已经集成该语法 快速生成HTML

  • CString,int,string,char*之间的转换

    C 43 43 标准函数库 中说的 有三个函数可以将字符串的内容转换为字符数组和C string 1 data 返回没有 0 的字符串数组 2 c str xff0c 返回有 0 的字符串数组 3 xff0c copy int 转 CStr

  • C++ TCP网络编程--服务器端多线程处理会话连接

    客户端程序 xff1a include lt winsock h gt include lt iostream gt pragma comment lib 34 ws2 32 lib 34 include lt Windows h gt i

  • matlab复杂函数多元函数拟合

    简介 本文介绍了基于matlab实现的复杂函数以及多元函数的拟合 在工程和研究中偶尔会遇到要用一个非常复杂的数学公式来拟合实验测量数据 xff0c 对这些复杂的数学公式拟合时 xff0c 采用常见的拟合方法往往会失败 xff0c 或者得不到

  • 基于模板替换的word文档自动生成

    简介 word文档自动生成程序是一个根据用户提供的模板word文档以及一些必要的数据文件来渲染生成所要的word文档的工具 关键词 xff1a 批量word文档生成 word文档渲染 自动生成word 使用场景 xff1a 几种典型的可以采

  • word文档-样例1-模板文档

  • word文档-样例1-结果文档

  • Omnibus F4V3 Pro飞控，APM飞控显示电池电压电流

    默认时 xff0c Omnibus F4 Pro烧写APM飞控后 xff0c 电池检测器没有设置的 想要屏幕上显示电池电压和电流信息 xff0c 就需要设置一下 设置信息如下 xff1a BATT MONITOR 61 4 然后重启 xff

  • 网络通信之大小端、字节序转换函数

    在上篇文章中我们提到了UDP xff0c TCP有关函数 xff0c 并知道了一个重要的结构体struct sockaddr 想要实现通信首先要知道通信端的地址 xff0c 所以首先了解一下IPv4套接字地址结构体 span class t

  • MAVROS +ardupilot +gazebo 无人机集群仿真 （一）

    MAVROS 43 ardupilot 43 gazebo 无人机集群仿真 xff08 一 xff09 无人机仿真环境搭建仿真软件安装仿真环境测试无人机多机仿真apm launch文件修改修改 iris ardupilot world修改

  • ubuntu搭建APT源简单方法

    一 为什么需要搭建APT源 原因如下 xff1a 1 在公司内网离线情况下 xff0c ubuntu无法通过apt原生源进行下载 2 有些源国内无法正常访问 xff0c 需要翻墙 基于以上原因 xff0c 需要自建APT源 二 准备条件 需

热门标签