一、jetson nano 远程桌面设置
默认jetson nano 的 Desktop Sharing是打不开的需要进行如下配置:
1、编辑org.gnome.Vino.gschema.xml文件
sudo vi /usr/share/glib-2.0/schemas/org.gnome.Vino.gschema.xml
文件编辑可用vi/vim/gedit/nano等编辑器,根据个人使用习惯选择。
2、文件最后添加下列代码
<key name="enabled" type="b">
<summary>Enable remote access to the desktop</summary>
<description>
If true, allows remote access to the desktop via the RFB
protocol. Users on remote machines may then connect to the
desktop using a VNC viewer.
</description>
<default>false</default>
</key>
3、编译
sudo glib-compile-schemas /usr/share/glib-2.0/schemas
这时就可以打开Desktop Sharing设置了。
二、安装远程桌面控制vino
1、安装vino
sudo apt-get install vino
2、安装dconf-editor
sudo apt-get install dconf-editor
3、运行dconf-editor
dconf-editor
4、关闭prompt-enabled 和 require-encryption
在打开的界面中进入org > gnome > desktop > remote-access路径,找到prompt-enabled 和 require-encryption的设置,将✔去掉。
三、Windows端安装运行VNC Viewer
1、下载VNC Viewer
2、查看jetson nano ip地址,并运行vino-server
ip a
usr/lib/vino/vino/server
**注:**jetson nano 和远程连接的主机需要在同一个网络中,如果使用的是WIFI,IP地址是wlan0的地址。
3、运行VNC Viewer远程连接
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系:hwhale#tublm.com(使用前将#替换为@)