1.使用mavlink based软件 没有ROS
2.使用无线连接，没有ROS
3. Onboard computer + ROS + WiFi link (recommended)
Control Methods 有下面两种方式
1. Offboard Control with Custom Code
参考 https://pixhawk.org/dev/direct-uart-offboard-control
取出sensor的数据 可以进一步处理再通过mavlink发送出来
2. Offboard Control with Mavros
参考 https://pixhawk.org/dev/ros/mavros_offboard
使用ROS MAVROS
Position control
Accepts PoseStamped for position and yaw
-
The Pose message position is sent to controllers
-
Only yaw from orientation quaternion is sent
-
TF : position + yaw from orientation quaternion is sent
Topics :
Parameters :
-
position/listen_tf (bool) - Listen for desired position setpoint transforms
-
position/frame_id - Frame for TF
-
position/child_frame_id - Child frame for TF
-
position/tf_rate_limit - Limit tf publish rate (default 10Hz)
转载于:https://www.cnblogs.com/fastwave2004/p/4583650.html
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)
