目录
最近要用SX1281做一款产品，把学习过程记录下，以便后期查阅。
DS_SX1280-1-2_V3.0_SC.zip_sx1280中文手册-其它文档类资源-CSDN下载
SX1281 | 长距离低功耗 2.4 GHz 射频收发器 | Semtech
SX1281 | 长距离低功耗 2.4 GHz 射频收发器 | Semtech
SX1280 | 长距离低功耗 2.4 GHz 射频收发器 | Semtech
SX1281不支持测距功能；SX1280支持普通测试功能，不支持高级测距功能；SX1282支持普通测距和高级测距功能。如果仅仅用作数据传输，三款芯片没有区别。
下载SX1281DemoCodeDriver-C.zip固件包，解压缩后，打开工程，环境如下：
1）软件：MDK V5；
2）MCU型号：STM32L476RGTx；
3）固件版本为：Firmware Version: 170919A；
工程如下图所示：
和SX1281相关文件如下图所示，一共5个文件：
其中radio.h为接口抽象文件，把和SX128X相关操作，全部抽象为API接口，官方提供，无需更改。
struct Radio_s
{
/*!
* \brief Initializes the radio
*
* \param [IN] callbacks Structure containing the driver callback functions
*/
void ( *Init )( RadioCallbacks_t *callbacks );
/*!
* \brief Resets the radio
*/
void ( *Reset )( void );
/*!
* \brief Gets the current radio status
*
* \retval status Radio status
*/
RadioStatus_t ( *GetStatus )( void );
/*!
* \brief Writes the given command to the radio
*
* \param [in] opcode Command opcode
* \param [in] buffer Command parameters byte array
* \param [in] size Command parameters byte array size
*/
void ( *WriteCommand )( RadioCommands_t opcode, uint8_t *buffer, uint16_t size );
/*!
* \brief Reads the given command from the radio
*
* \param [in] opcode Command opcode
* \param [in] buffer Command parameters byte array
* \param [in] size Command parameters byte array size
*/
void ( *ReadCommand )( RadioCommands_t opcode, uint8_t *buffer, uint16_t size );
/*!
* \brief Writes multiple radio registers starting at address
*
* \param [in] address First Radio register address
* \param [in] buffer Buffer containing the new register's values
* \param [in] size Number of registers to be written
*/
void ( *WriteRegisters )( uint16_t address, uint8_t *buffer, uint16_t size );
/*!
* \brief Writes the radio register at the specified address
*
* \param [in] address Register address
* \param [in] value New register value
*/
void ( *WriteRegister )( uint16_t address, uint8_t value );
/*!
* \brief Reads multiple radio registers starting at address
*
* \param [in] address First Radio register address
* \param [out] buffer Buffer where to copy the registers data
* \param [in] size Number of registers to be read
*/
void ( *ReadRegisters )( uint16_t address, uint8_t *buffer, uint16_t size );
/*!
* \brief Reads the radio register at the specified address
*
* \param [in] address Register address
*
* \retval value The register value
*/
uint8_t ( *ReadRegister )( uint16_t address );
/*!
* \brief Writes Radio Data Buffer with buffer of size starting at offset.
*
* \param [in] offset Offset where to start writing
* \param [in] buffer Buffer pointer
* \param [in] size Buffer size
*/
void ( *WriteBuffer )( uint8_t offset, uint8_t *buffer, uint8_t size );
/*!
* \brief Reads Radio Data Buffer at offset to buffer of size
*
* \param [in] offset Offset where to start reading
* \param [out] buffer Buffer pointer
* \param [in] size Buffer size
*/
void ( *ReadBuffer )( uint8_t offset, uint8_t *buffer, uint8_t size );
/*!
* \brief Gets the current status of the radio DIOs
*
* \retval status [Bit #3: DIO3, Bit #2: DIO2,
* Bit #1: DIO1, Bit #0: BUSY]
*/
uint8_t ( *GetDioStatus )( void );
/*!
* \brief Return firmware version
*
* \retval firmware The firmware version
*/
uint16_t ( *GetFirmwareVersion )( void );
/*!
* \brief Sets the power regulators operating mode
*
* \param [in] mode [0: LDO, 1:DC_DC]
*/
void ( *SetRegulatorMode )( RadioRegulatorModes_t mode );
/*!
* \brief Sets the radio in configuration mode
*
* \param [in] mode The standby mode to put the radio into
*/
void ( *SetStandby )( RadioStandbyModes_t mode );
/*!
* \brief Sets the radio for the given protocol
*
* \param [in] packetType [PACKET_TYPE_GFSK, PACKET_TYPE_LORA,
* PACKET_TYPE_FLRC, PACKET_TYPE_BLE]
*
* \remark This method has to be called before SetRfFrequency,
* SetModulationParams and SetPacketParams
*/
void ( *SetPacketType )( RadioPacketTypes_t packetType );
/*!
* \brief Set the modulation parameters
*
* \param [in] modParams A structure describing the modulation parameters
*/
void ( *SetModulationParams )( ModulationParams_t *modParams );
/*!
* \brief Sets the packet parameters
*
* \param [in] packetParams A structure describing the packet parameters
*/
void ( *SetPacketParams )( PacketParams_t *packetParams );
/*!
* \brief Sets the RF frequency
*
* \param [in] frequency RF frequency [Hz]
*/
void ( *SetRfFrequency )( uint32_t frequency );
/*!
* \brief Sets the data buffer base address for transmission and reception
*
* \param [in] txBaseAddress Transmission base address
* \param [in] rxBaseAddress Reception base address
*/
void ( *SetBufferBaseAddresses )( uint8_t txBaseAddress, uint8_t rxBaseAddress );
/*!
* \brief Sets the transmission parameters
*
* \param [in] power RF output power [-18..13] dBm
* \param [in] rampTime Transmission ramp up time
*/
void ( *SetTxParams )( int8_t power, RadioRampTimes_t rampTime );
/*!
* \brief Sets the IRQ mask and DIO masks
*
* \param [in] irqMask General IRQ mask
* \param [in] dio1Mask DIO1 mask
* \param [in] dio2Mask DIO2 mask
* \param [in] dio3Mask DIO3 mask
*/
void ( *SetDioIrqParams )( uint16_t irqMask, uint16_t dio1Mask, uint16_t dio2Mask, uint16_t dio3Mask );
/*!
* \brief Sets the Sync Word given by index used in GFSK, FLRC and BLE protocols
*
* \remark 5th byte isn't used in FLRC and BLE protocols
*
* \param [in] syncWordIdx Index of SyncWord to be set [1..3]
* \param [in] syncWord SyncWord bytes ( 5 bytes )
*
* \retval status [0: OK, 1: NOK]
*/
uint8_t ( *SetSyncWord )( uint8_t syncWordIdx, uint8_t *syncWord );
/*!
* \brief Sets the radio in reception mode
*
* \param [in] timeout Structure describing the reception timeout value
*/
void ( *SetRx )( TickTime_t timeout );
/*!
* \brief Reads the payload received. If the received payload is longer
* than maxSize, then the method returns 1 and do not set size and payload.
*
* \param [out] payload A pointer to a buffer into which the payload will be copied
* \param [out] size A pointer to the size of the payload received
* \param [in] maxSize The maximal size allowed to copy into the buffer
*/
uint8_t ( *GetPayload )( uint8_t *payload, uint8_t *size, uint8_t maxSize );
/*!
* \brief Sends a payload
*
* \param [in] payload A pointer to the payload to send
* \param [in] size The size of the payload to send
* \param [in] timeout The timeout for Tx operation
*/
void ( *SendPayload )( uint8_t *payload, uint8_t size, TickTime_t timeout );
/*!
* \brief Set the driver in polling mode.
*
* In polling mode the application is responsible to call ProcessIrqs( ) to
* execute callbacks functions.
* The default mode is Interrupt Mode.
* @code
* // Initializations and callbacks declaration/definition
* radio = SX1281( mosi, miso, sclk, nss, busy, int1, int2, int3, rst, &callbacks );
* radio.Init( );
* radio.SetPollingMode( );
*
* while( true )
* {
* // IRQ processing is automatically done
* radio.ProcessIrqs( ); // <-- here, as well as callback functions
* // calls
* // Do some applicative work
* }
* @endcode
*
* \see SX1281SetInterruptMode
*/
void ( *SetPollingMode )( void );
/*!
* \brief Set the driver in interrupt mode.
*
* In interrupt mode, the driver communicate with the radio during the
* interruption by direct calls to ProcessIrqs( ). The main advantage is
* the possibility to have low power application architecture.
* This is the default mode.
* @code
* // Initializations and callbacks declaration/definition
* radio = SX1281( mosi, miso, sclk, nss, busy, int1, int2, int3, rst, &callbacks );
* radio.Init( );
* radio.SetInterruptMode( ); // Optionnal. Driver default behavior
*
* while( true )
* {
* // Do some applicative work
* }
* @endcode
*
* \see SX1281SetPollingMode
*/
void ( *SetInterruptMode )( void );
/*!
* \brief Initializes the radio registers to the recommended default values
*/
void ( *SetRegistersDefault )( void );
/*!
* \brief Gets the current Operation Mode of the Radio
*
* \retval RadioOperatingModes_t last operating mode
*/
RadioOperatingModes_t ( *GetOpMode )( void );
/*!
* \brief Sets the radio in sleep mode
*
* \param [in] sleepConfig The sleep configuration describing data
* retention and RTC wake-up
*/
void ( *SetSleep )( SleepParams_t sleepConfig );
/*!
* \brief Sets the radio in FS mode
*/
void ( *SetFs )( void );
/*!
* \brief Sets the radio in transmission mode
*
* \param [in] timeout Structure describing the transmission timeout value
*/
void ( *SetTx )( TickTime_t timeout );
/*!
* \brief Sets the Rx duty cycle management parameters
*
* \param [in] rxTime Structure describing reception timeout value
* \param [in] sleepTime Structure describing sleep timeout value
*/
void ( *SetRxDutyCycle )( RadioTickSizes_t Step, uint16_t NbStepRx, uint16_t RxNbStepSleep );
/*!
* \brief Sets the radio in CAD mode
*
* \see SX1281::SetCadParams
*/
void ( *SetCad )( void );
/*!
* \brief Sets the radio in continuous wave transmission mode
*/
void ( *SetTxContinuousWave )( void );
/*!
* \brief Sets the radio in continuous preamble transmission mode
*/
void ( *SetTxContinuousPreamble )( void );
/*!
* \brief Gets the current radio protocol
*
* \retval packetType [PACKET_TYPE_GFSK, PACKET_TYPE_LORA,
* PACKET_TYPE_FLRC, PACKET_TYPE_BLE, PACKET_TYPE_NONE]
*/
RadioPacketTypes_t ( *GetPacketType )( void );
/*!
* \brief Sets the number of symbols to be used for Channel Activity
* Detection operation
*
* \param [in] cadSymbolNum The number of symbol to use for Channel Activity
* Detection operations [LORA_CAD_01_SYMBOL, LORA_CAD_02_SYMBOL,
* LORA_CAD_04_SYMBOL, LORA_CAD_08_SYMBOL, LORA_CAD_16_SYMBOL]
*/
void ( *SetCadParams )( RadioLoRaCadSymbols_t cadSymbolNum );
/*!
* \brief Gets the last received packet buffer status
*
* \param [out] payloadLength Last received packet payload length
* \param [out] rxStartBuffer Last received packet buffer address pointer
*/
void ( *GetRxBufferStatus )( uint8_t *payloadLength, uint8_t *rxStartBuffer );
/*!
* \brief Gets the last received packet payload length
*
* \param [out] pktStatus A structure of packet status
*/
void ( *GetPacketStatus )( PacketStatus_t *pktStatus );
/*!
* \brief Returns the instantaneous RSSI value for the last packet received
*
* \retval rssiInst Instantaneous RSSI
*/
int8_t ( *GetRssiInst )( void );
/*!
* \brief Returns the current IRQ status
*
* \retval irqStatus IRQ status
*/
uint16_t ( *GetIrqStatus )( void );
/*!
* \brief Clears the IRQs
*
* \param [in] irq IRQ(s) to be cleared
*/
void ( *ClearIrqStatus )( uint16_t irq );
/*!
* \brief Calibrates the given radio block
*
* \param [in] calibParam The description of blocks to be calibrated
*/
void ( *Calibrate )( CalibrationParams_t calibParam );
/*!
* \brief Saves the current selected modem configuration into data RAM
*/
void ( *SetSaveContext )( void );
/*!
* \brief Sets the chip to automatically send a packet after the end of a packet reception
*
* \remark The offset is automatically compensated inside the function
*
* \param [in] time The delay in us after which a Tx is done
*/
void ( *SetAutoTx )( uint16_t time );
/*!
* \brief Sets the chip to automatically receive a packet after the end of a packet transmission
*
* \remark The offset is automatically compensated inside the function
*
* \param [in] time The delay in us after which a Rx is done
*/
void ( *SetAutoFS )( uint8_t enable );
/*!
* \brief Enables or disables long preamble detection mode
*
* \param [in] enable [0: Disable, 1: Enable]
*/
void ( *SetLongPreamble )( uint8_t enable );
/*!
* \brief Saves the payload to be send in the radio buffer
*
* \param [in] payload A pointer to the payload
* \param [in] size The size of the payload
*/
void ( *SetPayload )( uint8_t *payload, uint8_t size );
/*!
* \brief Sets the Sync Word given by index used in GFSK, FLRC and BLE protocols
*
* \remark 5th byte isn't used in FLRC and BLE protocols
*
* \param [in] syncWordIdx Index of SyncWord to be set [1..3]
* \param [in] syncWord SyncWord bytes ( 5 bytes )
*
* \retval status [0: OK, 1: NOK]
*/
void ( *SetSyncWordErrorTolerance )( uint8_t errorBits );
/*!
* \brief Sets the Initial value for the LFSR used for the CRC calculation
*
* \param [in] seed Initial LFSR value ( 4 bytes )
*
*/
void ( *SetCrcSeed )( uint16_t seed );
/*!
* \brief Set the Access Address field of BLE packet
*
* \param [in] accessAddress The access address to be used for next BLE packet sent
*
* \see SX1281::SetBleAdvertizerAccessAddress
*/
void ( *SetBleAccessAddress )( uint32_t accessAddress );
/*!
* \brief Set the Access Address for Advertizer BLE packets
*
* All advertizer BLE packets must use a particular value for Access
* Address field. This method sets it.
*
* \see SX1281::SetBleAccessAddress
*/
void ( *SetBleAdvertizerAccessAddress )( void );
/*!
* \brief Sets the seed used for the CRC calculation
*
* \param [in] seed The seed value
*
*/
void ( *SetCrcPolynomial )( uint16_t seed );
/*!
* \brief Sets the Initial value of the LFSR used for the whitening in GFSK, FLRC and BLE protocols
*
* \param [in] seed Initial LFSR value
*/
void ( *SetWhiteningSeed )( uint8_t seed );
/*!
* \brief Return the Estimated Frequency Error in LORA operations
*
* \retval efe The estimated frequency error [Hz]
*/
double ( *GetFrequencyError )( void );
};
sx1281.c为实现文件，实现上述所有接口，官方提供，无需更改。
sx1281-hal.c为SX1281驱动和用户之间提供实现层：
1）Radio变量提供radio.h抽象的实例，便于用于通过它调用sx1281.c的函数。
2）需要用户提供：HAL_Delay（）、GpioWrite（）、GpioRead、SpiInOut（）、SpiIn（）等函数。
3）HAL_Delay（）函数实现：这个函数就是一个延时函数，根据手册自己设定，为了调试，这里实现了一个ms级的软件延时函数。
4）GpioWrite（）函数实现：
HAL库：
void GpioWrite( GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, uint32_t value )
{
HAL_GPIO_WritePin( GPIOx, GPIO_Pin , ( GPIO_PinState ) value );
}LL库：
#define GpioWrite(__PORT,__PIN,VALUE) do{ \
if(VALUE){ \
LL_GPIO_SetOutputPin(__PORT,__PIN); \
}else{ \
LL_GPIO_ResetOutputPin(__PORT,__PIN);\
} \
}while(0);4）GpioRead（）函数实现：
HAL库：
uint32_t GpioRead( GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin )
{
return HAL_GPIO_ReadPin( GPIOx, GPIO_Pin );
}LL库：
#define GPIO_READ_BIT(__GPIO,__PIN) LL_GPIO_IsInputPinSet(__GPIO,__PIN)
#define GpioRead(__GPIO,__PIN) GPIO_READ_BIT(__GPIO,__PIN)5）SpiInOut（）函数实现：
HAL库：
/*!
* @brief Sends txBuffer and receives rxBuffer
*
* @param [IN] txBuffer Byte to be sent
* @param [OUT] rxBuffer Byte to be sent
* @param [IN] size Byte to be sent
*/
void SpiInOut( uint8_t *txBuffer, uint8_t *rxBuffer, uint16_t size )
{
HAL_SPIEx_FlushRxFifo( &SpiHandle );
#ifdef USE_DMA
blockingDmaFlag = true;
HAL_SPI_TransmitReceive_DMA( &SpiHandle, txBuffer, rxBuffer, size );
WAIT_FOR_BLOCKING_FLAG
#else
HAL_SPI_TransmitReceive( &SpiHandle, txBuffer, rxBuffer, size, HAL_MAX_DELAY );
#endif
}这里有传入了一个发送数组首地址、一个接收数组首地址，还有一个长度；我的疑问是先把数据发送出去，再接收，还是发送一个字节，接收一个字节。往下看底层函数HAL_SPI_TransmitReceive（因为HAL_SPI_TransmitReceive_DMA和HAL_SPI_TransmitReceive实现功能是一样的）：
while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
{
/* check TXE flag */
if (txallowed && (hspi->TxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)))
{
if (hspi->TxXferCount > 1U)
{
hspi->Instance->DR = *((uint16_t *)pTxData);
pTxData += sizeof(uint16_t);
hspi->TxXferCount -= 2U;
}
else
{
*(__IO uint8_t *)&hspi->Instance->DR = (*pTxData++);
hspi->TxXferCount--;
}
/* Next Data is a reception (Rx). Tx not allowed */
txallowed = 0U;
#if (USE_SPI_CRC != 0U)
/* Enable CRC Transmission */
if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
{
/* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */
if (((hspi->Instance->CR1 & SPI_CR1_MSTR) == 0U) && ((hspi->Instance->CR2 & SPI_CR2_NSSP) == SPI_CR2_NSSP))
{
SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM);
}
SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
}
#endif /* USE_SPI_CRC */
}
/* Wait until RXNE flag is reset */
if ((hspi->RxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)))
{
if (hspi->RxXferCount > 1U)
{
*((uint16_t *)pRxData) = hspi->Instance->DR;
pRxData += sizeof(uint16_t);
hspi->RxXferCount -= 2U;
if (hspi->RxXferCount <= 1U)
{
/* set fiforxthresold before to switch on 8 bit data size */
SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
}
}
else
{
(*(uint8_t *)pRxData++) = *(__IO uint8_t *)&hspi->Instance->DR;
hspi->RxXferCount--;
}
/* Next Data is a Transmission (Tx). Tx is allowed */
txallowed = 1U;
}
if ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick() - tickstart) >= Timeout))
{
errorcode = HAL_TIMEOUT;
goto error;
}
}从代码分析是发送一个字节，接收一个字节，我的实现：
uint8_t Spi1InOut( uint8_t outData )
{
uint8_t RxData=0;
while(!LL_SPI_IsActiveFlag_TXE(SPI1));
LL_SPI_TransmitData8(SPI1,outData);
//Soft_delay_us(100);
while(!LL_SPI_IsActiveFlag_TXE(SPI1));
while(!LL_SPI_IsActiveFlag_RXNE(SPI1));
RxData = LL_SPI_ReceiveData8(SPI1);
return RxData;
}
void SpiInOut( uint8_t *txBuffer, uint8_t *rxBuffer, uint16_t size )
{
uint16_t i=0;
if(NULL == txBuffer || NULL == rxBuffer || !size){
return;
}
for(i=0;i<size;i++){
rxBuffer[i] = Spi1InOut(txBuffer[i]);
}
}6）SpiIn（）函数实现：
HAL库：
void SpiIn( uint8_t *txBuffer, uint16_t size )
{
#ifdef USE_DMA
blockingDmaFlag = true;
HAL_SPI_Transmit_DMA( &SpiHandle, txBuffer, size );
WAIT_FOR_BLOCKING_FLAG
#else
HAL_SPI_Transmit( &SpiHandle, txBuffer, size, HAL_MAX_DELAY );
#endif
}我的实现：
void SpiIn( uint8_t *txBuffer, uint16_t size )
{
uint16_t i=0;
if(NULL == txBuffer || !size){
return;
}
for(i=0;i<size;i++){
Spi1InOut(txBuffer[i]);
}
}7）GpioSetIrq（）函数屏蔽掉
8）SPI初始化：
HAL库：
void SpiInit( void )
{
SpiHandle.Instance = SPI1;
SpiHandle.Init.Mode = SPI_MODE_MASTER;
SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
SpiHandle.Init.DataSize = SPI_DATASIZE_8BIT;
SpiHandle.Init.CLKPolarity = SPI_POLARITY_LOW;
SpiHandle.Init.CLKPhase = SPI_PHASE_1EDGE;
SpiHandle.Init.NSS = SPI_NSS_SOFT;
SpiHandle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
SpiHandle.Init.TIMode = SPI_TIMODE_DISABLE;
SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SpiHandle.Init.CRCPolynomial = 7;
SpiHandle.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
SpiHandle.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
if ( HAL_SPI_Init( &SpiHandle ) != HAL_OK )
{
Error_Handler( );
}
}我的实现：
/**
* @brief SPI1 Initialization Function
* @param None
* @retval None
*/
static void spi1_init(void)
{
/* USER CODE BEGIN SPI1_Init 0 */
/* USER CODE END SPI1_Init 0 */
//LL_SPI_InitTypeDef SPI_InitStruct = {0};
//LL_GPIO_InitTypeDef GPIO_InitStruct;
/* Peripheral clock enable */
LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOA);
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SPI1);
//
LL_SPI_Disable(SPI1);
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
do{
const static LL_GPIO_InitTypeDef c_tGPIO_InitStruct = {
.Pin = LL_GPIO_PIN_5,
.Mode = LL_GPIO_MODE_ALTERNATE,
.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH,
.OutputType = LL_GPIO_OUTPUT_PUSHPULL,
.Pull = LL_GPIO_PULL_UP,
.Alternate = LL_GPIO_AF_0,
};
LL_GPIO_Init(GPIOA, (LL_GPIO_InitTypeDef*)&c_tGPIO_InitStruct);
}while(0);
do{
const static LL_GPIO_InitTypeDef c_tGPIO_InitStruct = {
.Pin = LL_GPIO_PIN_6,
.Mode = LL_GPIO_MODE_ALTERNATE,
.Speed = LL_GPIO_SPEED_FREQ_HIGH,
.OutputType = LL_GPIO_OUTPUT_PUSHPULL,
.Pull = LL_GPIO_PULL_UP,
.Alternate = LL_GPIO_AF_0,
};
LL_GPIO_Init(GPIOA, (LL_GPIO_InitTypeDef*)&c_tGPIO_InitStruct);
}while(0);
do{
const static LL_GPIO_InitTypeDef c_tGPIO_InitStruct = {
.Pin = LL_GPIO_PIN_7,
.Mode = LL_GPIO_MODE_ALTERNATE,
.Speed = LL_GPIO_SPEED_FREQ_HIGH,
.OutputType = LL_GPIO_OUTPUT_PUSHPULL,
.Pull = LL_GPIO_PULL_UP,
.Alternate = LL_GPIO_AF_0,
};
LL_GPIO_Init(GPIOA, (LL_GPIO_InitTypeDef*)&c_tGPIO_InitStruct);
}while(0);
/* SPI1 interrupt Init */
NVIC_SetPriority(SPI1_IRQn, 0);
NVIC_DisableIRQ(SPI1_IRQn);
//NVIC_EnableIRQ(SPI1_IRQn);
/* SPI1 parameter configuration*/
/* USER CODE BEGIN SPI1_Init 1 */
/* USER CODE END SPI1_Init 1 */
do{
const static LL_SPI_InitTypeDef c_tSPI_InitStruct = {
.TransferDirection = LL_SPI_FULL_DUPLEX,
.Mode = LL_SPI_MODE_MASTER, //
.DataWidth = LL_SPI_DATAWIDTH_8BIT, //
.ClockPolarity = LL_SPI_POLARITY_LOW, //
.ClockPhase = LL_SPI_PHASE_1EDGE, //
.NSS = LL_SPI_NSS_SOFT, //
.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV16, //
.BitOrder = LL_SPI_MSB_FIRST, //
.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
.CRCPoly = 7,
};
LL_SPI_Init(SPI1, (LL_SPI_InitTypeDef*)&c_tSPI_InitStruct);
//LL_SPI_SetDataWidth(SPI1,LL_SPI_DATAWIDTH_8BIT);
}while(0);
LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA);
LL_SPI_DisableNSSPulseMgt(SPI1);
/* USER CODE BEGIN SPI1_Init 2 */
/* USER CODE END SPI1_Init 2 */
/* Configure the SPI1 FIFO Threshold */
LL_SPI_SetRxFIFOThreshold(SPI1, LL_SPI_RX_FIFO_TH_QUARTER);
/* Configure SPI1 transfer interrupts */
/* Enable TXE Interrupt */
//LL_SPI_EnableIT_TXE(SPI1);
/* Enable RXNE Interrupt */
//LL_SPI_EnableIT_RXNE(SPI1);
/* Enable SPI1 Error Interrupt */
//LL_SPI_EnableIT_ERR(SPI1);
LL_SPI_Enable(SPI1);
}如果能够打印出来如下信息，则表示SPI驱动移植成功。
1）官网驱动main.c中其它和Lora相关的拷贝过来：
2）switch( AppState )屏蔽掉
3）增加delay（）
while(1){
SX1281ProcessIrqs( );
my_delay_ms(1000);
}4）修改5个函数
void OnTxDone( void )
{
AppState = APP_TX;
printf( "<>>>>>>>>OnTxDone\n\r" );
Radio.SetDioIrqParams( TxIrqMask, TxIrqMask, IRQ_RADIO_NONE, IRQ_RADIO_NONE );
Radio.SendPayload((uint8_t*)"12345",5, ( TickTime_t ){ RX_TIMEOUT_TICK_SIZE, TX_TIMEOUT_VALUE });
}
void OnRxDone( void )
{
AppState = APP_RX;
//printf( "<>>>>>>>>OnRxDone\n\r" );
BufferSize = 0;
Radio.GetPayload( Buffer, &BufferSize, BUFFER_SIZE );
Buffer[BufferSize+1] = 0;
//printf("size = %d ,%s",BufferSize,Buffer);
MY_PRINTF("OnRxDone\r\n",Buffer,BufferSize);
//Radio.SetRx( ( TickTime_t ) { RX_TIMEOUT_TICK_SIZE, RX_TIMEOUT_VALUE } );
}
void OnTxTimeout( void )
{
AppState = APP_TX_TIMEOUT;
printf( "<>>>>>>>>TXE\n\r" );
Radio.SetDioIrqParams( TxIrqMask, TxIrqMask, IRQ_RADIO_NONE, IRQ_RADIO_NONE );
Radio.SendPayload((uint8_t*)"12345",5, ( TickTime_t ){ RX_TIMEOUT_TICK_SIZE, TX_TIMEOUT_VALUE });
}
void OnRxTimeout( void )
{
AppState = APP_RX_TIMEOUT;
printf( "<>>>>>>>>OnRxTimeout\n\r" );
//Radio.SetRx( ( TickTime_t ) { RX_TIMEOUT_TICK_SIZE, RX_TIMEOUT_VALUE } );
Radio.SetRx( ( TickTime_t ) { RX_TIMEOUT_TICK_SIZE, 0xFFFF } );
}
void OnRxError( IrqErrorCode_t errorCode )
{
AppState = APP_RX_ERROR;
printf( "RXE<>>>>>>>>\n\r" );
Radio.SetRx( ( TickTime_t ) { RX_TIMEOUT_TICK_SIZE, RX_TIMEOUT_VALUE } );
}
void OnCadDone( bool channelActivityDetected )
{
printf( "<>>>>>>>>OnCadDone\n\r" );
}5）SpreadingFactor配置：
增加：
Radio.SetStandby( STDBY_RC );
switch(modulationParams.Params.LoRa.SpreadingFactor){
case LORA_SF5:
case LORA_SF6:
Radio.WriteRegister(0x0925,0x1E);
break;
case LORA_SF7:
case LORA_SF8:
Radio.WriteRegister(0x0925,0x37);
break;
case LORA_SF9:
case LORA_SF10:
case LORA_SF11:
case LORA_SF12:
Radio.WriteRegister(0x0925,0x32);
break;
}6）接收相关：
通过如下配置为接收：
Radio.SetDioIrqParams( RxIrqMask, RxIrqMask, IRQ_RADIO_NONE, IRQ_RADIO_NONE );
//Radio.SetRx( ( TickTime_t ) { RX_TIMEOUT_TICK_SIZE, RX_TIMEOUT_VALUE } );
Radio.SetRx( ( TickTime_t ) { RX_TIMEOUT_TICK_SIZE, 0xFFFF } );7）通过如下配置为发送：
Radio.SetDioIrqParams( TxIrqMask, TxIrqMask, IRQ_RADIO_NONE, IRQ_RADIO_NONE );
Radio.SendPayload((uint8_t*)"12345",5, ( TickTime_t ){ RX_TIMEOUT_TICK_SIZE, TX_TIMEOUT_VALUE });8)屏蔽掉SX1281SetPollingMode( );增加SX1281SetInterruptMode();因为SX1281ProcessIrqs( )函数中，如下逻辑不对：
if( PollingMode == true )
{
if( IrqState == true )
{
__disable_irq( );
IrqState = false;
__enable_irq( );
}
else
{
return;
}
}下面是接收其他数据效果图：
<----------------------------------------------------------------------------------------------------------------------------->
2022.10.03
显现：就是发送5个字节，但是接收是128字节
参数配置：
/*!
* \brief Defines the buffer size, i.e. the payload size
*/
#define BUFFER_SIZE 128
packetParams.PacketType = PACKET_TYPE_LORA;
packetParams.Params.LoRa.PreambleLength = 6;
packetParams.Params.LoRa.HeaderType = LORA_PACKET_VARIABLE_LENGTH;
packetParams.Params.LoRa.PayloadLength = BUFFER_SIZE;
packetParams.Params.LoRa.CrcMode = LORA_CRC_ON;
packetParams.Params.LoRa.InvertIQ = LORA_IQ_NORMAL;发送配置：
Buffer[0] = 1;
Buffer[1] = 2;
Buffer[2] = 3;
Buffer[3] = 4;
Buffer[4] = 5;
Radio.SendPayload(Buffer,5, ( TickTime_t ){ RX_TIMEOUT_TICK_SIZE, TX_TIMEOUT_VALUE });接收显示：
Radio.GetPayload( Buffer, &BufferSize, BUFFER_SIZE );
MY_PRINTF("OnRxDone\r\n",Buffer,BufferSize);结果：
查遍了手册和官方提供的SX1281PingPong历程，没有解决；问官方支持，也没有解决。于是查看官方sx1280-devKit-v1p6历程，看到：
case PER_TX_START:
Eeprom.EepromData.DemoSettings.CntPacketTx++;
DemoInternalState = APP_IDLE;
Buffer[0] = ( Eeprom.EepromData.DemoSettings.CntPacketTx >> 24 ) & 0xFF;
Buffer[1] = ( Eeprom.EepromData.DemoSettings.CntPacketTx >> 16 ) & 0xFF;
Buffer[2] = ( Eeprom.EepromData.DemoSettings.CntPacketTx >> 8 ) & 0xFF;
Buffer[3] = Eeprom.EepromData.DemoSettings.CntPacketTx & 0xFF;
Buffer[4] = PerMsg[0];
Buffer[5] = PerMsg[1];
Buffer[6] = PerMsg[2];
for( i = 7; i < Eeprom.EepromData.DemoSettings.PayloadLength; i++ )
{
Buffer[i] = i;
}
TX_LED = !TX_LED;
IrqMask = IRQ_TX_DONE | IRQ_RX_TX_TIMEOUT;
UpdateRadioFrequency( Channels[CurrentChannel] );
Radio.SetRfFrequency( Channels[CurrentChannel] );
Radio.SetDioIrqParams( IrqMask, IrqMask, IRQ_RADIO_NONE, IRQ_RADIO_NONE );
Radio.SendPayload( Buffer, Eeprom.EepromData.DemoSettings.PayloadLength,
( TickTime_t ){ RX_TIMEOUT_TICK_SIZE, Eeprom.EepromData.DemoSettings.TimeOnAir << 1 } );继续追代码：
ModulationParams.Params.LoRa.SpreadingFactor = ( RadioLoRaSpreadingFactors_t ) Eeprom.EepromData.DemoSettings.ModulationParam1;
ModulationParams.Params.LoRa.Bandwidth = ( RadioLoRaBandwidths_t ) Eeprom.EepromData.DemoSettings.ModulationParam2;
ModulationParams.Params.LoRa.CodingRate = ( RadioLoRaCodingRates_t ) Eeprom.EepromData.DemoSettings.ModulationParam3;
PacketParams.Params.LoRa.PreambleLength = Eeprom.EepromData.DemoSettings.PacketParam1;
PacketParams.Params.LoRa.HeaderType = ( RadioLoRaPacketLengthsModes_t )Eeprom.EepromData.DemoSettings.PacketParam2;
PacketParams.Params.LoRa.PayloadLength = Eeprom.EepromData.DemoSettings.PacketParam3;
PacketParams.Params.LoRa.Crc = ( RadioLoRaCrcModes_t ) Eeprom.EepromData.DemoSettings.PacketParam4;
PacketParams.Params.LoRa.InvertIQ = ( RadioLoRaIQModes_t ) Eeprom.EepromData.DemoSettings.PacketParam5;
Eeprom.EepromData.DemoSettings.PayloadLength = PacketParams.Params.LoRa.PayloadLength;于是明白了，发送的字长是由PacketParams.Params.LoRa.PayloadLength参数决定的，并不是由Radio.SendPayload（）函数传入的参数决定。于是进行如下修改：
void rf_send(uint8_t* pchBuffer,uint16_t hwSize)
{
if(NULL == pchBuffer || !hwSize){
return;
}
if(hwSize != packetParams.Params.LoRa.PayloadLength){
packetParams.Params.LoRa.PayloadLength = hwSize;
Radio.SetPacketParams( &packetParams );
}
Radio.SendPayload(pchBuffer,hwSize, ( TickTime_t ){ RX_TIMEOUT_TICK_SIZE, TX_TIMEOUT_VALUE });
}结果：
注意：经过测试，在显示包头格式下，PacketParams.Params.LoRa.PayloadLength参数不影响接收数据长度，也就是说这个参数设置多少无所谓，接收数据根据实际发送字长接收；隐士包头格式未测试。